Hi all. Question about my 500 4K's CG03. I was doing a little maintenance last night just checking to make sure all is well and operational, and the 500 decides it needs a compass calibration. No problem. Easy enough. I did the calibration and noted that the video image on the ST10 was frozen. I rebooted the bird only to find now that the CG03 will not do anything. No lights. No movement. Nothing. I checked the cable connections etc. but found nothing at all. One other thing I also noticed is that when I shut down the 500, the main LED status indicator will go off, but not the other four. You have to do a battery pull to get a full shut down. When the CG03 is completely removed, this does not happen and the 500 behaves normally. Any ideas what may have happened? Any clue as to where I would even begin to look? Just to be sure whether it is a 500 or CG03 problem, I tested the CG03 on the steady grip and it did the same thing. Nothing works at all. So I'm confident that it is solely with the CG03.
Any help or insight would be greatly appreciated. Thanks in advance!
Any help or insight would be greatly appreciated. Thanks in advance!