CGO3+ Gimbal slide mount

[Steve Carr]

I know that all the dealers have been out of stock for the upper gimbal mount for the camera. There is a guy in Iowa making the mount. I bought a couple of them and they seem robust.

CGO3+ Camera Gimbal Slide for Yuneec Typhoon H | eBay

It's is not a plug and play ready part. This is simply a lower cost alternative to replacing with an OEM part. Hi" This item wasn't plug & play. It works ok now, So I am happy. As for being able to adjust the machine, it is already at it's limits producing these parts.

www.ebay.com

 

[Mrgs1]

Hasn't this guy made the battery case too, a while ago? It's amazing what can printed, and a very competitive price.

 

[Steve Carr]

Hasn't this guy made the battery case too, a while ago? It's amazing what can printed, and a very competitive price.

Not sure about the battery case. I think this one for the camera will work well. It's a bit crude looking but if it works.........great.

 

[Mrgs1]

Not sure about the battery case. I think this one for the camera will work well. It's a bit crude looking but if it works.........great.

It was the eBay sellers photo, it jogged the memory or lack of! Shame it's US only I'm sure a few guys this way would like one!

 

[Steve Carr]

It was the eBay sellers photo, it jogged the memory or lack of! Shame it's US only I'm sure a few guys this way would like one!

It can always be sent. It's just a matter of postage. If you send him a message and ask for several pieces he might be willing to ship.

 

[PatR]

Deprnding on the descriptive terminology used on the export form, it might not be possible to ship internationally. Exporting UAV tech or products from the U. S. is prohibited unless approved under an ITAR license. Our postal people are trained to stop movement of exports involving anything drone, UAV, or sUAS.

So, a description like “Typhoon H camera mount”, or “multirotor camera mount” or certainly “drone camera mount” might be refused shipment, where a simpler description of “camera mount” or “recreational hobby supplies” would pass muster.

 

[Mrgs1]

If it was from a shop with Yuneec logo, packaging etc that's different, when I've bought from US before, it's been " Camera spares". Since it's completely unbranded you could say anything even " Food mixer spare parts" they wouldn't know.

 

[Steve Carr]

“recreational hobby supplies”

Good point. I've sent a number of parts to different countries when needed. I label them as "Spare toy parts" even though it's not for DJI.

 

[Vegasrobbi]

The original mount is designed to breakaway, my concern would be how well this mount mimics it.

Unfortunately I have knocked the camera off my H many times and the breakaway feature has limited damage.

I did invest in several spare OE mounts a while back but like other H parts they are getting scarce.

 

[Steve Carr]

The original mount is designed to breakaway

That was certainly a benefit. I''m confident a single individual with a 3D printer in his garage did not attempt to design nor even know about such a feature. But it does make the difference between filming or not so long as the parts are not available.

 

[Mrgs1]

Good point. I've sent a number of parts to different countries when needed. I label them as "Spare toy parts" even though it's not for DJI.

Do you even have fill anything in with eBay global shipping programme?

 

[Steve Carr]

Do you even have fill anything in with eBay global shipping programme?

I don't understand your question.

 

[Mrgs1]

I don't understand your question.

I don't think you fill in a declaration with eBay global shipping programme, it's prints a label and you take to a parcel or postal depot/ office, so you don't say what's in the parcel, only used the system a few times, can't 100% recall? It might be different for US though.

 

[Vegasrobbi]

I saw on Vertigo drones today:



Mount Set: Yuneec Typhoon H CGO3+

In Production

Ships in Early 2020

 

[Mrgs1]

I saw on Vertigo drones today:



Mount Set: Yuneec Typhoon H CGO3+

In Production

Ships in Early 2020

I think we've heard this all before back in 2019.

 

[Steve Carr]

I saw on Vertigo drones today:

I have quite a few of those if someone needs one in a hurry.

 

[Mrgs1]

I have quite a few of those if someone needs one in a hurry.

Is the guy still 3D printing them?

 

[Steve Carr]

Is the guy still 3D printing them?

Yes. But I got in a shipment last week from an order I had placed a couple of months ago.

 

[Rick-okc]

I'm interested in getting a mount for the CH03+ camera for a Typhoon H, either original or 3d printed. Who do I need to contact?
Part # YUNCGO3P105

 

[Mrgs1]

I'm interested in getting a mount for the CH03+ camera for a Typhoon H, either original or 3d printed. Who do I need to contact?
Part # YUNCGO3P105

Try Yuneec skins if your in US.

https://yuneecskins.com/all-products/ols/products/typhoon-h-cgo3-top-mount-plate-yuncgo3p105-new