Hi!
Let someone experienced with these cameras share some knowledge. Especially the gimbal, for which I'm asking, was prepared from a combination of parts from other crashed cameras. All parts are in visual working order, the camera itself works, but the gimbal moves continuously after initialization. No beeps or other errors. Because the possible cause can be the mainboard, the IMU, the encoders, and so on, I'm asking for an analyzing guide on what can be wrong, depending on the gimbal behavior. For example. if the IMU is not calibrated, the camera moves in this way, if the position sensor is defective, this happens, and so on.
I well know this is a business for some guys here. I don't want to ruin it. Just want to say, some people prefer to DIY all things. The same people help the rest, without expecting some profit. So, the topic doesn't point to the great masters, just to non-professionals and amateurs.
Regards!
Let someone experienced with these cameras share some knowledge. Especially the gimbal, for which I'm asking, was prepared from a combination of parts from other crashed cameras. All parts are in visual working order, the camera itself works, but the gimbal moves continuously after initialization. No beeps or other errors. Because the possible cause can be the mainboard, the IMU, the encoders, and so on, I'm asking for an analyzing guide on what can be wrong, depending on the gimbal behavior. For example. if the IMU is not calibrated, the camera moves in this way, if the position sensor is defective, this happens, and so on.
I well know this is a business for some guys here. I don't want to ruin it. Just want to say, some people prefer to DIY all things. The same people help the rest, without expecting some profit. So, the topic doesn't point to the great masters, just to non-professionals and amateurs.
Regards!