DIY Connector Wire Between Q500 4K and Gimbal, YUNCGO3104

[OHPRG]

Hello Everyone, after reading every post here I still have a question, as I cannot seem to be able to purchase the pre-made connector from the gimbal to the body of the drone I am going to have to fabricate one of my own.

I found a picture of a replacement wire that (apparently) a third party vendor had fabricated that was not "twisted" and did not have the ferrite core wound onto it. I enlarged the picture and color coded the wires and would appreciate it if someone with an actual genuine part could verify the pin-out.

In addition it would be a help if someone could ID the connector types and model numbers so I could purchase those separately as well.

Thank you for your time and attention in this matter.

 

[WTFDproject]

Hello Everyone, after reading every post here I still have a question, as I cannot seem to be able to purchase the pre-made connector from the gimbal to the body of the drone I am going to have to fabricate one of my own.

Have you checked with these folks?
"YUNEEC Connection Wire Between Typhoon Q500 4K and Gimbal"
"Amazon.com: Yuneec YUNCGO3104 Connection Wire Between Q500 4K and Gimble: Electronics"
"New Yuneec YUNCGO3104 Connect Wire Between CB203 gimbal or CG203+ camera combo 813646021267 | eBay"

If you aren't in the US, let me know.

 

[Steve Carr]

Midcityhobby is a reputable seller on eBay.
This listing on Amazon is a ripoff ($45).
Also Terrestrial Imaging is reputable. Yuneec Q500 4K Gimbal Connection Wire - Terrestrial Imaging Store

 

[OHPRG]

Thank You Kind Sir, for doing what amounts to my legwork for me....Last time I checked B&H these parts were back ordered, but also it will cost me 100% of the price of the part and take at least a week to get here but a viable opton none the less....

The Amazon link that you graciously provided for me wants $45 for the part.

The ebay link that you were also kind enough to provide is not selling a genuine Yuneec part....so for the money if using a non genuine jpart, I might as well make my own, *** these are solderless connectors all one needs to do is strip the wires and insert them into the plug and I believe my skill-set is within that range.

But I do thank you for taking the time out of your busy day to research that not only for me but for all the other operators out there, you are a kind and generous man.

 

[rogress]

Is this the same cable for $9.99 at Horizon Hobby?

Connector Wire Between Q500 4K and Gimbal | HorizonHobby

ProductShortDescription

www.horizonhobby.com

 

[OHPRG]

Thanks to rogress Horizon Hobby now has an order...!!!
2 gold stars out of petty cash to you sir, thank you very much....
Will still take 4-9 days for it to arrive but only $3 shipping so all in for $14 bucks, I can live with that.

 

[OHPRG]

I had, however managed to just ID the larger of the two connectors, the part that goes to the drone body as...seen here.....