Hello Everyone. New to the forum and not to the drone world as well and can really use some help. I am currently trying to upgrade the firmware for my Typhoon H and am not sure which version to use. Currently I have the following: ST 16 - System 03.01.b27, Transmit tx v000.24, Radio rf v01.10, My camera is C-GO3-pro. When I go to the Yuneec download page (Download – Yuneec), there is a ton of options and I do not know which ones to download. Could someone give me some direction on which one for firmware, camera firmware, and Gimbal firmware. Thanks in advance for any help. Dan
Firmware Update Questions
- Thread starter Dan B
- Start date
You may not need to update the firmware. With the ST16 and the H turned on, go to System Settings, then About.
Compare your firmware to that shown below.
Compare your firmware to that shown below.
The general rule of thumb is "If the system is operating normally and doing everything you want it to do, do not update the firmware." The statement is made because this forum is littered with the tales of woe brought about by failed updates. Many of which did not really need to be performed. The firmware update system has a lot of bad history. Especially do not attempt an update if your gimbal is currently on Version 1.27.
With that said, these are the current update revisions.
With that said:
The versions for the ST16 are in ST16 version 3.1.30
The versions for the drone and camera are contained in TyphoonH_Ver3.04. The camera part is region specific. For example, the U.S is Region A (3.04A) and Europe is Region E (3.04E)
With that said, these are the current update revisions.
With that said:
The versions for the ST16 are in ST16 version 3.1.30
The versions for the drone and camera are contained in TyphoonH_Ver3.04. The camera part is region specific. For example, the U.S is Region A (3.04A) and Europe is Region E (3.04E)
Last edited:
Thanks Steve. This is what it shows
Attachments
So how to I get from what I have, shown here to what your snap shows?
Attachments
You have to start the drone and have the drone and camera bound to the controller for the other items to display their versions.
Thanks. Here is the current format, so I guess the question is, do I need any updates or not?
Attachments
You could use an update. But it is not absolutely required if all is working well.
You can get the firmware from the appropriate @Yuneec Skins repository.
Latest EU Firmware:
www.dropbox.com
Latest US Firmware:
www.dropbox.com
I would not even attempt the wireless update method. This YouTube video by Jeff Sibelius seems a lot more reliable:
You can get the firmware from the appropriate @Yuneec Skins repository.
Latest EU Firmware:
Dropbox
www.dropbox.com
Latest US Firmware:
Dropbox
www.dropbox.com
I would not even attempt the wireless update method. This YouTube video by Jeff Sibelius seems a lot more reliable:
Thank you so very much. I will let you know if I am successfulYou could use an update. But it is not absolutely required if all is working well.
You can get the firmware from the appropriate @Yuneec Skins repository.
Latest EU Firmware:
Dropbox
Latest US Firmware:
Dropbox
I would not even attempt the wireless update method. This YouTube video by Jeff Sibelius seems a lot more reliable:
All updated and flying great. Thanks very much everyone for your input
I am trying to get my aircraft working correctly. The aircraft is showing no versions of anything under aircraft. I’m trying to get the camera to show video. What is the issue and can it be fixed?
- Joined
- Dec 16, 2024
- Messages
- 497
- Reaction score
- 250
- Age
- 38
Ur more than welcome to give me a video call via what’s app and I’ll guide and troubleshoot for you to the best of my ability. Drop me a direct message for number
First, be sure the camera is actually bound to the controller. It is a different binding process than the drone itself. You will have neither video nor version information until the camera is properly bound.
As stated by @WTFDproject it is likely your camera is not bound to the controller. You can try creating a new model and bind to it to see if it solves your problem.
Similar threads
