Are we allowed to use the Typhoon H to carry out a fish line, look for fish, and drop the line when we spot a school of fish? 
Fishing with Typhoon H
- Thread starter Tecneek
- Start date
Don't see why not .... unless it's illegal in your part of the world 
.
You could just rig up a drop mechanism and attach it to the legs so that when you spot the fish .... just lower the legs and away it goes .... simple
.
Cheers
.You could just rig up a drop mechanism and attach it to the legs so that when you spot the fish .... just lower the legs and away it goes .... simple
.Cheers
Like this!!!Are we allowed to use the Typhoon H to carry out a fish line, look for fish, and drop the line when we spot a school of fish?
Some people turn the Yuneec's audio on, for what, I don't know? It's annoying! With the Hand held , maybe !
Well for me the sound and the legs going up were the main points for buying the H.Some people turn the Yuneec's audio on, for what, I don't know? It's annoying! With the Hand held , maybe !
- Joined
- Jun 5, 2016
- Messages
- 77
- Reaction score
- 14
- Age
- 55
...there's gotta be a way to rig a hoop in the line and have it release when the H raises its landing gear....anyone have any ideas??....it would be nice to fly out to a school of fish and then simply flick the switch to raise the gear and the line drops..
My son and I do a lot of surf fishing. Generally, I use a kayak to get the bait out 400 yards or so. I saw the tuna fishing vid a while back, and figured I could do the same. Haven't had a chance to set up a line drop system on my G though....
- Joined
- Jul 14, 2016
- Messages
- 35
- Reaction score
- 19
- Age
- 59
Last edited:
You could just put a small plastic command J hook on back of camera and pan camera up and fish hook should drop off.
Command™ Small Utility Hooks
Command™ Small Utility Hooks
I am also interested in drone fishing using my Typhoon H. But I do not know how to install a good improvised device that will let go the fishing line and bait after putting up the landing gears. We need some engineers here to give us suggestions how to do this! Thank you all!
