H won't start or accelerate

[Steve Carr]

Ok re-calibrated 100% acceleration and deceleration. Why I didn't think about calibration behooves me?

I never recommend doing a cal unless there is a very good reason to do so. Most of the time it's a dirty stick and you never want to cal a dirty stick.
But we still don't know if the problem is fixed. Won't know until you can take it outside and go up a few feet.

 

[AH-1G]

Update; Still unable to start. Flashing Purplish every ½ seconds, no white at all. I did turn off gps still no start. Reengaged gps same issue.
plenty of sats on both.

 

[Steve Carr]

Upload the last telemetry and remote file again. I need to see what J1 is doing.

 

[AH-1G]

Ok, just looked at my binding, H not bound. Tried several attempts to bind but it wont. I watched the binding video did exactly as shown.
When I press the refresh I can see the H to bind, it binds momentarily then disappears.

 

[Steve Carr]

Ok, just looked at my binding, H not bound. Tried several attempts to bind but it wont. I watched the binding video did exactly as shown.
When I press the refresh I can see the H to bind, it binds momentarily then disappears.

Create a new model and try binding again. If it won't stay bound after that, do a factory reset of the controller.

 

[AH-1G]

Create a new model and try binding again. If it won't stay bound after that, do a factory reset of the controller.

That worked created new model. Ok free pizza on me Steve. tell me pizza phone # and what pizza you want I will order from here. I'm sincere!
You can PM me on that!

 

[Ty Pilot]

Which was it AH, creating a new model or resetting the controller? Glad you got it fixed.

 

[AH-1G]

Which was it AH, creating a new model or resetting the controller? Glad you got it fixed.

THX,, new model. Interesting, took out to fly stayed at 15 to 20' for ten minutes then gear up, nothing,
so attempted several time still nothing. Brought down to 8 feet gear down and worked. Who knows, but all is ok now.