How to turn of gimball mode

[JasiekKuna]

Hi guys,

I need to put termovision on to my ceiling, I had a problem with becouse when I'm incline my Typhoon it levels horizontaly camera.
Id like to turn off this function to have camera in steady position, does anyone knows if it is possible?

 

[Eagle's Eye Video]

It is possible, but not on the H itself... you will need to obtain an Action Grip, designed to work with the CGO3+ camera. The grip has 2 modes, one will self-level... the second one does not.

 

[jannislh]

Actually it can but only in team-mode. You can set angle and direction on the camera remote and the camera will always face the same direction.

 

[Sureshot]

Hi guys,

I need to put termovision on to my ceiling, I had a problem with becouse when I'm incline my Typhoon it levels horizontaly camera.
Id like to turn off this function to have camera in steady position, does anyone knows if it is possible?

Put the tilt mode switch in position 3 (down = rate mode).
Then you can tilt up.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[JasiekKuna]

Put the tilt mode switch in position 3 (down = rate mode).
Then you can tilt up.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Thanks!
I know about this function. The problem is this room is 3 meters high and is quite tight.

 

[Sureshot]

Time to be creative.
Maybe boot up, hit record, and don't arm.
Hand hold the plane and manually aim the camera against the gimbal's gyro push back.
Keep the recording short to avoid over stressing the gimbal.
Then stop record & power down.