Micro Card Problem

Tonyhiffman · May 28, 2020

I have an issue with my micro sim card. I generally don't have one installed, but wanted to try and download a mission telemetry log onto one. SO I inserted a card into the slot and it disappeared into the ST16. I can hear it rattling around in there, but the unit works fine. I would like to open the case and get it out, so I was wondering if anyone knew of one of those fine help threads or videos demonstrating how to open the case.
I generally always just import missions through the micro usb cable to my computer, and update the software through the wifi, so it doesn't really impact my operations. But I don't like the idea of a piece of plastic rattling around in the controller. Any thoughts?

Steve Carr · May 28, 2020

The ST16s isn't too hard to open up. In addition to the screws you can see on the back of the controller there are also 2 under each rubber hand hold pad. Those will just peel off and then can be stuck back on again later. The adhesive tape is covering the two screw holes so you will need to cut the tape around the holes.
The screws are 2.5mm hex head and there is one in the handle that is 1.5mm hex.

Once you remove the screws place turn the controller back over and carefully lift the bottom side. There are wires at the top so you need to pivot roll the top cover from the bottom forward. Inspect the slot for the sd card. You may be able to put a piece of foam tape on top of the sd card holder so the cards won't fall inside again.

Yuneec Skins · May 29, 2020

This Help?

h-elsner · May 29, 2020

I do not understand why still there are people in the world that do not use USB cable to up- or download files from ST10 or ST16? It so awkward and slow to use the SD card.

br HE

Tonyhiffman · May 29, 2020

I use the USB cable all the time while transferring missions from the desktop app. Sometimes in the field it's nice to have the option to transfer via SD Card.
Thanks for the help all. I'll let you know how it goes

Tonyhiffman · May 30, 2020

Steve,
Thanks for the help. That worked. My ST16 looks a little different but good guidance.
I need to check out that Yuneec Skins site a little closer. Looks like a good option
Thanks again guys