- Joined
- Jan 21, 2019
- Messages
- 1,096
- Reaction score
- 660
UPDATE: How on to extract and read H Plus flight Log Data. by @DoomMeister
1) Build a file structure similar to ST-16S
Flight2Log--|
|- Remote
|- RemoteGPS
|- Sensor
|- Telemetry
2) Place the proper file in each folder, then point the Q500log2kml program to the Flight2Log folder and it will find the files.
3) You can also use the File Manager on the ST-16S to zip the entire Flight2Log folder then transfer that file to your PC.
Point Q500log2kml to the Flight2Log folder.
The first tab is overview and it will show info for each file and let you know at a glance which are flights, how far, how high, total distance, etc. Then pick a file and click the second tab for more details. While there you can switch between telemetry, Remote, and RemoteGPS for display.
Hello gang,
I need help in locating my stick inputs in H Plus, where and what should I be looking at?
Reason that I am asking, because during my 3rd flight the H+ stalled for a good few seconds, without any stick inputs while I was doing progressive survey. I toggled RTH it did not respond, and not responding to the gimbal. It was a total loss of RC, and I want to know, if can figure out what happened on that particular event through my telemetry. Is it possible? Also if you guys are also willing to help understand Q500 Log, specially on where to find anomalies and decipher my data, below is my telemetry.
Thank you in advance.
1) Build a file structure similar to ST-16S
Flight2Log--|
|- Remote
|- RemoteGPS
|- Sensor
|- Telemetry
2) Place the proper file in each folder, then point the Q500log2kml program to the Flight2Log folder and it will find the files.
3) You can also use the File Manager on the ST-16S to zip the entire Flight2Log folder then transfer that file to your PC.
Point Q500log2kml to the Flight2Log folder.
The first tab is overview and it will show info for each file and let you know at a glance which are flights, how far, how high, total distance, etc. Then pick a file and click the second tab for more details. While there you can switch between telemetry, Remote, and RemoteGPS for display.
Hello gang,
I need help in locating my stick inputs in H Plus, where and what should I be looking at?
Reason that I am asking, because during my 3rd flight the H+ stalled for a good few seconds, without any stick inputs while I was doing progressive survey. I toggled RTH it did not respond, and not responding to the gimbal. It was a total loss of RC, and I want to know, if can figure out what happened on that particular event through my telemetry. Is it possible? Also if you guys are also willing to help understand Q500 Log, specially on where to find anomalies and decipher my data, below is my telemetry.
Thank you in advance.
Attachments
Last edited: