One landing will not go down

[Smokdup]

This is my 2nd flight of this used typhoon h and this happen, one landing gear will not go down

Sent from my SM-N920V using Tapatalk

 

[BillyTexas]

This is my 2nd flight of this used typhoon h and this happen, one landing gear will not go downView attachment 4007

Sent from my SM-N920V using Tapatalk

Take it off...i think just 2 screws. Then pull down like you are unplugging it. Clean the contacts. See if that helps

Bill W.

 

[BobW55]

You can also remove the camera, power up the st-16 and the aircraft, (No Props) flip the H up side down and operate the landing gear up and down.
Like Billy suggested there are 2 hex screws (2mm I think) holding the gear in place. Remove the screws pull straight down, clean the contacts and put it back together.
Here is a good video of someone taking the H apart to repair his camera, but you can see how the landing gear come off. Watch from the 9:00 minute mark on is where he removes the landing gear.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Let us know how you make out.

 

[Mickeyboo]

Try rebounding...I had that problem on 2 H's and reminding solved it.

 

[Smokdup]

Removed gear and cleaned contacts and all seem good, I engaged them several times and they worked

Sent from my SM-N920V using Tapatalk

 

[Smokdup]

Thanks guys

Sent from my SM-N920V using Tapatalk

 

[WesBur13]

It's not a problem, it's a FEATURE! /s
For future reference you can test landing gear on the ground by flipping the H upside down and flipping the landing gear switch.