I've replaced the motor and then I replaced the entire board because someone said it was probably an ESC failure if changing the motor didn't help. Anyone have any idea why I am still getting a single motor malfunction?
Single motor malfunction
- Thread starter FunkyJuan
- Start date
Murray Martz
Premium Pilot
- Joined
- Jan 29, 2017
- Messages
- 1,370
- Reaction score
- 768
PatR
Premium Pilot
If you are obtaining the motor malfunction with the props removed I’m afraid you’ll be replacing stuff forever. The system ALWAYS enters a single motor malfunction mode when run with the props removed.
You have an individual motor test feature in the GUI. If they all work correctly there, go fly. At that point you’ll know the failures were not within the system...
You have an individual motor test feature in the GUI. If they all work correctly there, go fly. At that point you’ll know the failures were not within the system...
Last edited:
All props are on. It originally had a motor malfunction while flying and I replaced the motor. Then the same motor would not start on take off so I replaced the whole board. It still will not fire on takeoff.
Murray Martz
Premium Pilot
- Joined
- Jan 29, 2017
- Messages
- 1,370
- Reaction score
- 768
Replace the non-responsive one with one of the ones that works and rotates in the same direction as well as the ESC. This will narrow down the issue even more.
