The lens in my CGO3+ is misaligned (pics)

BoostedPerspective · Jun 29, 2016

WanderLust68 said:
I don't have a photography background so I don't think I'd have a good suggestion, perhaps someone else has an idea of a test target?

just doing a google search brings up lots of examples, but I don't know what would be good for this camera....an example could be the sample target from here?
How to Test Your Lens

Anything with good contrast will work. A brick wall, tree, etc. You can print a target. Use a book, etc, etc. Have plenty of light, and make it repeatable. Because of the small sensor size, the depth of field is huge. You need to take shots and look at them 1:1 on a decent sized monitor.

What is the sensor size in this camera? Lens aperture? Anyone know the hyperfocal distance?

Brent · Jun 29, 2016

ChrisP said:
Just found this post from you-tube, copied and pasted. Yuneec KNOWS they have a problem and are going quiet for the moment. That pisses me off, but to be honest, its an argument for holding on and keeping faith. Peau is the lens guy:
"
PeauProductions 1 week ago
Yuneec stopped by our office today and bought 7 of the 3.97mm lenses... so we'll see

I have an upgraded GoPro Hero 4 Black with the 3.97mm lens from Peau Productions and it is great. I had them swap it out, focus, etc. I did it mainly to remove fish eye, but it is a great lens. I haven't really played around with the CGO3+ yet, still just flying it. If I have an issue with the lens I will just send it into CarolinaDronz and have them swap it out. Sucks if that is the solution, but quite honestly it will be less of a headache.

BoostedPerspective · Jun 29, 2016

Well with the comments here, this lens is probably on my horizon. Especially if I have to take the camera apart to focus the factory lens anyway. Guess I need to call Yuneec and see if my camera is coming.

BoostedPerspective · Jun 29, 2016

DerStig said:
Problem is then you have an infects low bitrate camera that doesnt look as good as a GoPro... Go look at my comparison thread

This is the only UAV I care to own right now, other than maybe an Inspire. So I'm going to work with what it has.

BoostedPerspective · Jul 1, 2016

Finally heard from Yuneec:

Dear valued customer ,

This message is to inform you that we have not forgotten about you. We have inspected the camera and will be sending a replacement on Tuesday when our warehouse is open again.. We are trying to service every customer as soon as possible and we hope to have you flying or riding in no time. Thank you for your patience and understanding.

Have a Yuneec Day,

Yuneec Repair Team

From the date of the RMA issue, it took 25 days to hear from them about a course of action. So if they ship the camera on Tuesday, I'll probably get it the following Monday. Just shy of a month.
Then I'm guessing I'll be tearing it apart to refocus (or replace the lens) anyway.

CAPTAINDRONE · Jul 1, 2016

BoostedPerspective said:
Finally heard from Yuneec:

From the date of the RMA issue, it took 25 days to hear from them about a course of action. So if they ship the camera on Tuesday, I'll probably get it the following Monday. Just shy of a month.
Then I'm guessing I'll be tearing it apart to refocus (or replace the lens) anyway.

Better late than never! Fingers crossed that you get a camera with a great lens!

cokeaddict · Jul 2, 2016

Remember too guys that the more they sell, the longer times will take for repairs and warranties. BUT I would hate to imagine where we would all be with camera issues if it was DJI we had to deal with. Thank god its Yuneec. Like I said many times before, They will sort this issue out as soon as they can. I Have ordered the aftermarket lens today. Cannot wait to do a comparison between my original camera lens and the replacement one once I get my H.

CAPTAINDRONE · Jul 2, 2016

cokeaddict said:
Remember too guys that the more they sell, the longer times will take for repairs and warranties. BUT I would hate to imagine where we would all be with camera issues if it was DJI we had to deal with. Thank god its Yuneec. Like I said many times before, They will sort this issue out as soon as they can. I Have ordered the aftermarket lens today. Cannot wait to do a comparison between my original camera lens and the replacement one once I get my H.

Let us know if you encounter any problems with the disassembly & install. I may be forced to go this route as well.

BoostedPerspective · Jul 2, 2016

Between using the CGO3 on my H, and being super busy at work I missed my return window on the Typhoon 4k. (like an idiot) So I'm going to hold onto it until the H camera returns, then sell it. Sadly only flew it about 8 times, BUT the camera has seen more use.
I'm also thinking I'm going to grab that lens and swap it in. Where are you guys getting it? From the Dronez place or right from the manufacturer?

CAPTAINDRONE · Jul 2, 2016

BoostedPerspective said:
Between using the CGO3 on my H, and being super busy at work I missed my return window on the Typhoon 4k. (like an idiot) So I'm going to hold onto it until the H camera returns, then sell it. Sadly only flew it about 8 times, BUT the camera has seen more use.
I'm also thinking I'm going to grab that lens and swap it in. Where are you guys getting it? From the Dronez place or right from the manufacturer?

You have two choices at this time...

#1. Carolina Dronz. You can either purchase the lens or send in your camera and have them install it. Yuneec Typhoon H GGO3+ Camera Replacement

#2. Peau Productions. Right now you can only buy the lens from them. In the future you will be able to send in your camera and they will send you a return camera with new lens installed. Here is the email they sent me a few weeks ago:

Hello,

We are not setup yet to do the installs ourselves because we do not yet have replacement cameras if something is damaged. We believe Yuneec direct will soon have cameras in the next 30 days and we plan to purchase them so we can begin selling new cameras modded with various lenses along with servicing customers own cameras.

For now we are only setup to sell the lenses for customer install. The procedure is not very difficult if you follow the how-to video on the Yuneec lens page.

Peau Productions, Inc
Toll Free: +1 (877) 949-1684
Local: +1 (619) 554-8848
7592 Metropolitan Dr
3.97mm f/2.8 82d HFOV 16MP(No Distortion) – Peau Productions

BoostedPerspective · Jul 2, 2016

DerStig said:
Do the swap yourself it takes 5 mins

I had absolutely no intention of sending my camera anywhere, the plan is to do it myself. This is not a daunting task by any means.

CAPTAINDRONE · Jul 2, 2016

Peau Productions currently has the lens on sale.

BoostedPerspective · Jul 2, 2016

CAPTAINDRONE said:
Peau Productions currently has the lens on sale.

Yeah, saw it was cheaper there. Thanks for the links!

cokeaddict · Jul 2, 2016

BoostedPerspective said:
Yeah, saw it was cheaper there. Thanks for the links!

Yep a tad fidgety but easy enough to do. I did my gopro a couple of years back and that was easy. You just have to be careful as alot of the dismantled bits are plastic and thin. My gopro was sharp as a tac, It blew me away with the improvement the lens gave me.

BoostedPerspective · Jul 10, 2016

Just an update, my camera was finally shipped out. (two days after they said they would) Its due to arrive on the 13th. So that's roughly 5 weeks I went without a camera on the YTH. (yes I was using my CGO3) When it arrives I'll be throwing it on and checking it out, I'm not super hopeful.

Also, JUST last night I picked up a Phantom 4. Haven't even unboxed it yet, that's going to be today. Honestly I always hated the way they look, never wanted to like the DJI. But owning these things for me is 90% for the camera, (I have a smaller quad for "fun") and from what I've seen in specs and actual footage/video the DJI cam and the CGO3+ just can't be compared. I still have my Typhoon 4k, and the YTH, and I do love flying the YTH. This is my first DJI product. I don't care for the remote, or having to provide a tablet/phone, but it is undeniably better in a lot of ways.

BoostedPerspective · Jul 10, 2016

My first couple of shots this morning with the Phantom 4...

OnTheRopes · Jul 10, 2016

If you are in the UK or Europe the Peauproductions lens can be bought from here Homepage for SeeSense Miniature Camera Solutions suppliers and distributers they are in Reading UK and also Slovak Republic. They are miniature camera specialists, I had a chat with them and they are going to investigate the CGO3+ and see what other quality lenses may be available too.

ChrisP · Jul 10, 2016

BoostedPerspective said:
But owning these things for me is 90% for the camera,

Yep. No matter how cool a drone is, if its camera is dog poop... you have dog poop.

BTW BP, at this point I have to say I LOVE my Phantom 4. Short first run video shot at 4k, rendered at 1080, color correction with Adobe Lumenetri:

I totally don't miss my crappy CGO3+ camera.

BoostedPerspective · Jul 10, 2016

ChrisP said:
Yep. No matter how cool a drone is, if its camera is dog poop... you have dog poop.

BTW BP, at this point I have to say I LOVE my Phantom 4. Short first run video shot at 4k, rendered at 1080, color correction with Adobe Lumenetri:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

I totally don't miss my crappy CGO3+ camera.

That is fantastic.
I *just* rendered my first DJI video, quick thing on Instagram. 4k, 24fps, d-log. Also graded with Lumetri. It was dark/sunset and it looks surprisingly good. I'm impressed.