Yuneec typhoon q500 4k

[Syed]

Hello
I just joined the Plattform. I need your help because my gimbel is not responding I have buyed New gimbel for go pro m58 kit it works perfekt but not working the pitch Funktion some one recomend me to check pwm connection of Mainboard. Now I think if I can get circuit plan from Mainboard it will be better. Or if some one have other idea? It will be great help for me. I am living in Germany and in this country there is no hope of help it's normal in Germany.

Many thanks of your help

 

[h-elsner]

Ohne Anfrage in deutschen Foren gibt es auch keine Hilfe in deutschen Foren.

Check this:

Dropbox

www.dropbox.com

Oder hier:

CGO 3 kann am Copter nicht geneigt werden - RC-Drohnen-Forum.de - Quadrocopter, Multicopter, Hexacopter

Moin! Bei meiner CGO 3, welche unter einem Q500 4K hängt, habe ich das Problem, dass diese sich über die ST10+ nicht nach oben und unten neigen läßt. Ich glaube nicht, dass die CGO 3 einen defekt hat, da sie am Steady Grip (egal ob über das Kabel…

www.rc-drohnen-forum.de

 

[Russell Smith]

Hello
I just joined the Plattform. I need your help because my gimbel is not responding I have buyed New gimbel for go pro m58 kit it works perfekt but not working the pitch Funktion some one recomend me to check pwm connection of Mainboard. Now I think if I can get circuit plan from Mainboard it will be better. Or if some one have other idea? It will be great help for me. I am living in Germany and in this country there is no hope of help it's normal in Germany.

Many thanks of your help

if it's anything like the regular Q-500 there's a tiny board inside the nose that controls power to the gimbel. I had that problem in the past.

 

[Syed]

Oh realy? I will check it out. Maybe that is the solution.
Many thanks

 

[h-elsner]

There are two tiny boards on the nose. One is the compass and has nothing to do with gimbal. The other is the contact plate for the gimbal connector.
The contact plate can be accessed from the outside:


The PWM signal looks like this:


And this is the compass module. Do not touch.