Antenna mod for H920 and 920 plus

[georgero]

I was inspired by H plus and I liked the idea to have the antennas outside. I have some DJI inspire antennas laying around and I print some case for them and here it is what I come up with. Maybe someone gets inspired too.

 

[Steve Carr]

I'm curious to see if you find a difference in the range with this mod. Please let us know.

 

[WTFDproject]

When the antennas were on the DJI, were they laid parallel to each other as they are on your H920? All other Yuneec models have the 2.4gHz antennas at ~90 degree angle to improve the shape of the signal field.

 

[EagleVisionAerial]

I was inspired by H plus and I liked the idea to have the antennas outside. I have some DJI inspire antennas laying around and I print some case for them and here it is what I come up with. Maybe someone gets inspired too.

Yea the stock H920/plus antenna setup is a joke. I was barely getting 1500 feet with little to no wifi noise. I just couldn't accept that so I got the Itelite DBS system for the controller and modded the drone with 2 external antennas for the receiver (control & telemetry). Check the pics...

 

[georgero]

When the antennas were on the DJI, were they laid parallel to each other as they are on your H920? All other Yuneec models have the 2.4gHz antennas at ~90 degree angle to improve the shape of the signal field.

Yes, the antennas on DJI where parallel installed. I have very good signal but I did not push it to the limit yet because I have a different problem with the drone now. I will start a new thread and maybe I get some answers.