CCC editor online - Version 1.7C

[abinder]

Eric, it seems that the 'delete mode' isn't working anymore in version 1.7. I'm using Firefox and Safari on a Mac.
Anyone else seeing this problem?

I noticed this as well.
I'm using the browser built into the ST16.


Sent from my iPhone using Tapatalk

 

[Eric]

Version 1.7B now available !
- fixed : the control of minimum distance between two waypoints.

DON'T FORGET TO REFRESH YOUR BROWSER UNTIL YOU SEE version 1.7B on the left panel at the bottom

 

[Eric]

Eric, it seems that the 'delete mode' isn't working anymore in version 1.7. I'm using Firefox and Safari on a Mac.
Anyone else seeing this problem?

FIXED !

 

[Bobjazz]

Great work, Eric!

 

[abinder]

I've used my ST16 controller to edit a CCC flight that I've done before. I everything seems okay except when I go to save it. It saves in the 'downloads' file of the 'pad' of the ST16. How do I go about moving it from the 'downloads' folder of the 'pad' to the location 'internal storage\flightmode\mission_data' ?


Sent from my iPhone using Tapatalk

 

[zandoli]

I've used my ST16 controller to edit a CCC flight that I've done before. I everything seems okay except when I go to save it. It saves in the 'downloads' file of the 'pad' of the ST16. How do I go about moving it from the 'downloads' folder of the 'pad' to the location 'internal storage\flightmode\mission_data' ?


Sent from my iPhone using Tapatalk

Use the File Manager app

 

[abinder]

Use the File Manager app

Thanks for the quick response.

I've tried to use it, but I don't see anything in it that lets me move the file to the proper location.


Sent from my iPhone using Tapatalk

 

[zandoli]

Thanks for the quick response.

I've tried to use it, but I don't see anything in it that lets me move the file to the proper location.


Sent from my iPhone using Tapatalk

File Manager
-downloads
-long press your file to select

Do you get the option to move, copy, etc?

 

[Schuller Thierry]

OK, I prepared three CCC from very simple to complicated.... Ready for testing tomorrow morning (the Mistral is blowing VERY hard)
I need all the night for praying

Mistral??
Where are you Eric? Provence / France??

 

[Eric]

Mistral??
Where are you Eric? Provence / France??

Yes I'm preparing my board and my sails for a afternoon in l'Almanarre !

 

[edwinp]

finally, be the first ccc editor in indonesia. Great job eric.
I sent donation for this project as well, from paypal [email protected]

 

[abinder]

File Manager
-downloads
-long press your file to select

Do you get the option to move, copy, etc?

After a long press of the file:
Only get the options copy, cut, delete, share, add favorite.


Sent from my iPhone using Tapatalk

 

[Mickeyboo]

Thanks again for your great work. If I'm creating waypoints and the second waypoint is 150 ft. higher in elevation and between the waypoints there is a gradual increase in height do I adjust both waypoints? If waypoint 3 decreases in elevation do I address that by adjusting waypoint 2 or 3?

 

[abinder]

Thanks again for your great work. If I'm creating waypoints and the second waypoint is 150 ft. higher in elevation and between the waypoints there is a gradual increase in height do I adjust both waypoints? If waypoint 3 decreases in elevation do I address that by adjusting waypoint 2 or 3?

150 ft higher in elevation in relation to what ?
How many way points ?
What are you trying to do ?
(Your description of what you're trying to do is rather vague.)


Sent from my iPhone using Tapatalk

 

[Mickeyboo]

150 ft higher in elevation in relation to what ?
How many way points ?
What are you trying to do ?
(Your description of what you're trying to do is rather vague.)


Sent from my iPhone using Tapatalk

I'm sorry you regarded my question as vague...it's how to change elevation from waypoint 1 to waypoint 2. I wanted a gradual climb until trre line then more pronounced. The first waypoint of which is 30 feet in height the second is 150 ft in height. I've answered my own question I need more waypoints which gradually increase elevation along the way. I'm starting in a valley climbing to top of valley then descending back into the valley from another direction. There will probably be 8 or 9 waypoints to smoothly compensate for elevation differences.

 

[KBflyer]

Do a simple test out in a open field. Point A at one end and Point B at the other end. Do the route and watch the climb rate or even take the telemetry and put it into Exmaps.com to watch it 3D. That way you will know how fast the elevation of the H is going to change to each waypoint.

 

[zandoli]

After a long press of the file:
Only get the options copy, cut, delete, share, add favorite.


Sent from my iPhone using Tapatalk

Use the 'Cut' option, then navigate to the folder path (\storage\flightmode\mission_data), you will get the option to paste in the folder.

 

[Mickeyboo]

Do a simple test out in a open field. Point A at one end and Point B at the other end. Do the route and watch the climb rate or even take the telemetry and put it into Exmaps.com to watch it 3D. That way you will know how fast the elevation of the H is going to change to each waypoint.

Thanks for the info...I was planning on a test which had elevation higher than I wanted but safe so I could observe climbing rate...I will also check out Exmaps...

 

[abinder]

Use the 'Cut' option, then navigate to the folder path (\storage\flightmode\mission_data), you will get the option to paste in the folder.

Thanks.



Sent from my iPhone using Tapatalk

 

[Mickeyboo]

Sorry but my english is very poor, and it's very difficult for me to understand your question.

My bad I was confusing you APP with Tuna's....thus question would make no sense to you...it may not even make sense to Tuna.