H920 gimble adapter

Snechovski · Jul 17, 2019

Does anyone have the part number for tho cgo3+ the h920 gimble adapter here in the US. I'm trying to buy one in the US and I was told that having a part number will help because the US yuneec isn't educated on those part numbers. Any help would be greatly helpful. Thanks

WTFDproject · Jul 17, 2019

This says "Item" number, but maybe it is also the part number:

PatR · Jul 17, 2019

That’s both the correct part and PN.

Question; why are these 920 inquiries always being initiated in the H Plus forum instead of the 920 forums? Thus far it has been a matter of pure luck that people familiar with the 920 have seen and responded to them. Most H, H Plus, and 520 owners have never been interested in the 920. Sort of like posting H inquiries in the Breeze forums.

Snechovski · Jul 17, 2019

Should I repost this in the 920 area or can it be moved? Also nothing comes up when I search for that in Amazon

Snechovski · Jul 17, 2019

I've actually found this item in a few areas none of them will ship to us I wish someone would just post where ther buying them in the US because yuneec us swears up and down they have none and will not get none

WTFDproject · Jul 17, 2019

I don't they were ever sold in the US. I remember some promises, but don't recall they ever came in stock in the US. Memory might be bad, may be getting it confused with something else, but I don't think you will find it here.

PatR · Jul 17, 2019

The Yuneec number we call to order direct does not stock them in their warehouse. For a long time they weren’t even aware they had access to any. The parts location in another warehouse for a repair facility in the midwest. If they run the P/N through their parts listings they will come across it. Lacking the PN the hired help won’t have a clue.

We should not forget that Yuneec has done all kinds of things with their sales and service departments over the last couple years and it may not be reasonable to think people that had experience and knowledge of this part are still employed there. Whomever you get on the other end of the call will need to be led by the hand. It may well be worth giving KAV a call to see if it is in their parts inventory.

The part has been ordered and obtained from Yuneec U.S. warehouses and a search of the 920 forum will eventually reveal the truth in that. The difficult part of all this is that to get some things done with Yuneec we need to be smarter than Yuneec and know what they have better than they do. Used to be that was hard to do, but when we know were to look for info and how to look for it, it’s pretty easy to do these days.

As for this thread, I suspect it will get moved to the 920 forums like the others did.

Snechovski · Aug 17, 2019

Finally got my adapter,, had to come all the way to Amsterdam for it but I'm sure gonna enjoy it!!

PatR · Aug 17, 2019

Along with flight times that will make other model drone owners very envious[emoji22][emoji4]

Xpfreak · Sep 7, 2019

Snechovski said:
Does anyone have the part number for tho cgo3+ the h920 gimble adapter here in the US. I'm trying to buy one in the US and I was told that having a part number will help because the US yuneec isn't educated on those part numbers. Any help would be greatly helpful. Thanks

Genuine authentic deals has it listed on their website, not searchable though, gotta go through listing for drone parts A-Z

Xpfreak · Sep 7, 2019

Snechovski said:
Does anyone have the part number for tho cgo3+ the h920 gimble adapter here in the US. I'm trying to buy one in the US and I was told that having a part number will help because the US yuneec isn't educated on those part numbers. Any help would be greatly helpful. Thanks

YUNH920P104 is the part...
It is available @ genuine authentic deals

H920 Connecting Bracket for CGO3+/CGOET Gimbal Camera
$159.99
genuineauthenticdeals.com

(747) 243-0285

maxian · Dec 5, 2020

hi, I installed with the adapter described above a cgo3 + on h920. but in the st24 radio i can't find the cgo3 + in the device menu, to bind. How should i do? to update the radio firmware?

Thank

WTFDproject · Dec 5, 2020

Did you tilt the H920 forward two times to get the rear LED on the drone flashing orange?
Is the LED flashing on the front of the CGo3+?
Can you post a screenshot of what you call "device menu" on the st24? I'm not sure if you are referring to the camera select menu, the binding screen, maybe the WiFi screen, or maybe something else.

This manual is in English, but is the only one I have. Camera binding in general is on Page 24.

maxian · Dec 5, 2020

No I have not tried to bind the model, the photos of the menu are attached

maxian · Dec 5, 2020

tha led in front of camera flah, and gimbal work.

WTFDproject · Dec 5, 2020

I don't have an H920, so I am only guessing at things. I hope @georgero or one of the other H920 members will be online soon to give better answers. Until they do:
Have you tried to select "New Model" to see if there is a stored model that includes the new gimbal?
Have you tried using the model for the GB603?

maxian · Dec 5, 2020

WTFDproject said:
I don't have an H920, so I am only guessing at things. I hope @georgero or one of the other H920 members will be online soon to give better answers. Until they do:
Have you tried to select "New Model" to see if there is a stored model that includes the new gimbal?
Have you tried using the model for the GB603?

No, not tried to go on new model, never to gb603 gimbal. i wiil do.

Wallaby · Dec 6, 2020

Hi, I guess you have a H920 (with a ST24 transmitter) but not the H920+ (ST16 radio) version. You can't use the adapter with the H920 version. Only the plus version is working with the adapter and the CGO3+.
I'm sorry.