I am looking to buy an original CG03 gimbal controller
In need of a CG03 gimbal controller
- Thread starter Momchil
- Start date
- Status
Do you mean the CGo3 Gimbal Board as pictured below? If so, it will not work by simply installing a new one or even one from a working camera. The board has to be calibrated to the specific camera, and the calibration program for that was never released to the general public.
Thanks for your reply, if the new controller won't start there is no point in looking. Be healthy!
Can you name a major brand company that releases their calibration software and repair manuals to the end user?
My question is-can another 3-axis controller be installed, will it work ??
for example this one:
a.aliexpress.com
for example this one:
48.89US $ |Alexmos Bgc 3.53 3-axis Firmware Simplebgc Brushless Gimbal Controller W/imu For Evvgc Fpv Gimbal Pitch Roll Yaw Control - Parts & Accs - AliExpress
Smarter Shopping, Better Living! Aliexpress.com
a.aliexpress.com
the power supply of the camera will do it with a separate DC / DC converter from 12 to 5.61 volts 1.8 ~3 A
This part of the controller that powers the camera itself works, but the other one does not, there are no lights on the controller itself, 3 integrated circuits together with stm 32 are hot, so I want to power the camera separately and put a new controller
You can power the camera alone. Trace the wires.
You can't control the gimbal with third party controller I guess.
You can't control the gimbal with third party controller I guess.
I am from Bulgaria, Silistra, if you have the opportunity we can write in viber, my number is 0886 644 205, Momchil
- Status
Similar threads
