Just another battery charger question.

[skysthelimit]

I've used the search on this but didnt find the answer.

I have a Cellpro powerlab 8 charger, and it uses a Deans connector on it, I am wondering on the Venom charger adapter if its possible to cut the banana clip leads of it and solder on a deans so I then could balance and storage the Yuneec batteries? I know in the RC car world it can work but I honestly have no idea about it in this side of the hobby.

Thanks

*EDIT* I thought I posted a link to the charger adapter but I did not.
Battery to Charger Adapter with Balance Leads For Yuneec Typhoon H Drone Premium | eBay

 

[Steve Carr]

This is what most people are using for aftermarket chargers.

Yuneec Typhoon H Drone Battery to RC LiPO Charger Adapter w/Balance Leads Wire | eBay

 

[skysthelimit]

This is what most people are using for aftermarket chargers.

Yuneec Typhoon H Drone Battery to RC LiPO Charger Adapter w/Balance Leads Wire | eBay

That is the charger adapter I was talking about, I thought I linked it but I didnt. Would it be okay to cut the banana plugs off it and solder on deans? My charger right now is set up to charge 10 lipos at a time so I'd just buy a bunch lol.

 

[PatR]

Charge adapters do not care what connectors are used at the charger side as long as they mate correctly with the charger's output connectors. Deans, banana, alligator clip, EC, are all the same for what the charge adapter needs to do. So yes, you can change the adapter connector. You could also make a Deans to banana adaptor and retain the plugs on the H adapter, or purchase a gang connector for that adaptation at a hobby shop. Several types are available for reasonable cost.