My Q is go left

[tefel]

I found out that my drones moved to the side of the flight(hovering)
And my st10's hardware monitor was j2 28.
Other things are not wrong How can I fix it
Pls help me TAT

 

[BobW55]

You may need to clean the sticks.
Get some electronic contact cleaner, you will have to disassemble the ST-10 controller.
Squirt some cleaner on the pots of all the sticks ( 2 pots each stick) wiggle them around and check it again.

 

[tefel]

I tried that method and it did not work. Is there any other way?

 

[BobW55]

Did you try re calibrating the St-10?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[tefel]

Thank you !!!

 

[AeroJ]

We should mention that is pointless doing the calibration until you are certain the sticks are outputting correctly. Calibrating when there is a hardware error can only make things worse.
If you tried cleaning and it didn't work, you probably need to try again until it does !