Needed st16 switches.

roncoinc · Oct 22, 2021

probly four on/off/on switches..
dont need the board,i can solder.
S1.S2,S3, or any combo,,,or,,,
where the heck can i get flat handled micro switches with off set pins to mount ??
tried looking up on the Salecom site ( maker) but not listed..
dont need to put more into these than they cost so if i must i can make something work

tnx for any suggestions or advice

WTFDproject · Oct 22, 2021

These might be the offset switches. I seem to recall some of the switches have center line pins. (Been awhile.)

5Pcs T7013-U2 3Pin ON-ON SPDT Long Flat Handle Remote Control Mini Toggle Switch | eBay

Switch Action: Latching. Insulation Resistance: 100MΩ min. 500VDC, 0.5mA. Handle Length: 21.1mm. Dielectric Strength: 1,000 VAC / 1 min.

www.ebay.com

OR dig through this mess to carefully choose if any are the ones you need:

Long Flat 3 Pin Mini Toggle Switch for sale | eBay

Get the best deals for Long Flat 3 Pin Mini Toggle Switch at eBay.com. We have a great online selection at the lowest prices with Fast & Free shipping on many items!

www.ebay.com

Did the top part of your switches pull out? If so you might want to look at Attachment 40 (ST16 Switch Spacer) of the PDF document attached to Way To Fix Drones project.

roncoinc · Oct 23, 2021

Thank you,,yes the top part pulled out and i saw the fix for that..
and tnx for the link,,been online two days and didnt see them

roncoinc · Oct 23, 2021

I sold all my stuff and equipment about 2+ years ago thinking anything could be replaced..
i had hundreds of these switches in diff configurations i could have gone thru and matched up what i needed..
now i know i was wrong..
but getting out of the electronics repair sideline was the best thing i could do,,,
three full sized pickup trucks and a trailer to haul it all away ,, and now i cant find a single switch !! LOL

johnnyb57 · Oct 23, 2021

If I'm not mistakin I got one last year from vertigo ? Check with Yuneec Skins, John can hook you up most likely...

Buddy Collins · Oct 24, 2021

roncoinc said:
probly four on/off/on switches..
dont need the board,i can solder.
S1.S2,S3, or any combo,,,or,,,
where the heck can i get flat handled micro switches with off set pins to mount ??
tried looking up on the Salecom site ( maker) but not listed..
dont need to put more into these than they cost so if i must i can make something work
tnx for any suggestions or advice

Not sure I'm exactly sure which switches you need but let me know if you cant find what you're looking for, I think I have a set from a ST-16 that I parted out years ago. You're welcome to them, I dont think I'll ever have a use for them..
Us Old-Timers need to stick together!

roncoinc · Nov 6, 2021

i just saw this !
thank you.
have some odd mini switches i'm trying to make work.
have two controllers,hope to fix both and part with one to take the curse off the other

need tilt mode sw -x 1
pan mode sw -x 2
obs avoid -x 2
landing gear -x2
thats about it

roncoinc · Nov 10, 2021

Buddy Collins said:
Not sure I'm exactly sure which switches you need but let me know if you cant find what you're looking for, I think I have a set from a ST-16 that I parted out years ago. You're welcome to them, I dont think I'll ever have a use for them..
Us Old-Timers need to stick together!

well,,after acquiring several switches i find they are a lil diff size ..if you still have some and would like to give it a try let me know tnx..

Buddy Collins · Nov 10, 2021

OK, here's what I have, message me your Name and Mailing Address and I'll send them to you via USPS Priority Mail Small Flat Rate Box, you pay what it costs me to ship.
Let me know, Buddy.

roncoinc · Nov 13, 2021

Buddy Collins said:
OK, here's what I have, message me your Name and Mailing Address and I'll send them to you via USPS Priority Mail Small Flat Rate Box, you pay what it costs me to ship.
Let me know, Buddy.

Oh wow !
i just found this getting up 3am unable to sleep !

you wont believe how much i appreciate this ..
Doom Miester had to send me a notice you replied