Both are standard with the 920+ so yes. The CGO-3 adapter was an added option. With it I can use a CGO-3 camera, which returns team mode to the system when used. Since I have 3 of them, and two more ST-16’s, one camera intended for still images is getting a Peau 8mm lens to provide a rough magnification factor of 4. Using that I’ll also have the geo reference info in photo EXIF data the CGO-4 lacks. Should there be a desire to use a CGO-ET on the 920 there will be no problem doing so. For $200.00 it made too much sense to get the adapter.
I had considered a 520 but since I don’t, and probably would not, do photogrammetry i wanted a system where camera flexibility was present. The 920 allows that and much more and starts out with a pretty good camera in its own right. So it has all the functionality of an H, part of the functionality of a 520, and saves me having to buy an E-90 and E-50. The Peau lens pretty much turns a CGO-3 into an E-50. Same sensor, same bit rate, same resolution, same magnification. Just looks different.
A little later I’ll mess with batteries, connectors, motors, and props to bump up the speed. For the money it’s a very nice foundation for a heavy lift hex.
I had considered a 520 but since I don’t, and probably would not, do photogrammetry i wanted a system where camera flexibility was present. The 920 allows that and much more and starts out with a pretty good camera in its own right. So it has all the functionality of an H, part of the functionality of a 520, and saves me having to buy an E-90 and E-50. The Peau lens pretty much turns a CGO-3 into an E-50. Same sensor, same bit rate, same resolution, same magnification. Just looks different.
A little later I’ll mess with batteries, connectors, motors, and props to bump up the speed. For the money it’s a very nice foundation for a heavy lift hex.
Last edited: