Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

Virgin flight with my H3.

Joined
Jan 24, 2021
Messages
6
Reaction score
9
Age
56
Wow what a day :)

13 degrees celcius 2.4 m/s wind and the sun brigth as ever.

So i took my new H3 out for a spin, calibrated compas ( easy it was ), placed it on the ground pressed the red button and of it went.

I have an DJI inspire 1 pro to compare the H3 with and i must say this drone is nice.

All worked and after 10 min i was flying it as a pro.

Looking forward to se the Pictures and Video i took.

/SkyWalkingTheSky
 
Joined
Nov 5, 2019
Messages
453
Reaction score
289
Age
66
Wow what a day :)

13 degrees celcius 2.4 m/s wind and the sun brigth as ever.

So i took my new H3 out for a spin, calibrated compas ( easy it was ), placed it on the ground pressed the red button and of it went.

I have an DJI inspire 1 pro to compare the H3 with and i must say this drone is nice.

All worked and after 10 min i was flying it as a pro.

Looking forward to se the Pictures and Video i took.

/SkyWalkingTheSky
Good to see that you had a your first flight with your new drone and all went well. I have the H-Plus and love it. The H-3 is Yuneec's newest H and not much is known as yet. Could you please share some of your photos and of possible videos. Your H-3 shares much of its older H-Plus flying carestics aldo yours hase cruise controls added which I would love to have. The camera on the H-3 is bacessely the same I believe but it has some enhancements added to it dy Lyca.
Cheeers.
Mike
 
  • Like
Reactions: SkyWalkingTheSky
Joined
Feb 16, 2021
Messages
17
Reaction score
5
Age
68
Location
Alabama USA
I flown my H3 a couple of times is my first drone is easy to fly camera drone controller everything works perfect except my gimbal does not respond to any commands it seems to be frozen in place I have installed all latest firmware updates any help will be appreciated
 

DoomMeister

Moderator/Tech Junkie
Staff member
Premium Pilot
Joined
Dec 25, 2017
Messages
6,830
Reaction score
3,944
Location
The Villages, FL USA
Have you placed the Pan Mode switch in the middle or bottom position and then used the Pan Knob to turn the camera left or right?
 
Joined
Feb 16, 2021
Messages
17
Reaction score
5
Age
68
Location
Alabama USA
I flown my H3 a couple of times is my first drone is easy to fly camera drone controller everything works perfect except my gimbal does not respond to any commands it seems to be frozen in place I have installed all latest firmware updates any help will be appreciated
Have you placed the Pan Mode switch in the middle or bottom position and then used the Pan Knob to turn the camera left or right?
Yes tried that and is dead hopefully I’ll be able to contact yuneec but last time I checked there was no USA phone number available
 

DoomMeister

Moderator/Tech Junkie
Staff member
Premium Pilot
Joined
Dec 25, 2017
Messages
6,830
Reaction score
3,944
Location
The Villages, FL USA
Yes tried that and is dead hopefully I’ll be able to contact yuneec but last time I checked there was no USA phone number available
Where did you purchase the H3 and how long have you had it?

There should be a hardware monitor for the controller to see if the controls are working properly. I don’t know how to access it on the ST16S, but most likely through the gear icon. See page 25 in the user manual. https://yuneecpilots.com/attachments/typhoon-h3_user-manual_v1-0-pdf.21600/
 
Last edited:

New Threads

Members online

Forum statistics

Threads
20,050
Messages
231,899
Members
24,404
Latest member
FlexK9