Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

cgo3+

  1. Rubik

    Video Bit Rate Question

    I'll bet someone out there knows the answer. Yesterday I did some testing with the CGO3+ at various resolutions and frame rates and exposures and shutter speeds. What I found was totally unexpected. I understand how the video bit rate is effected by the resolution and frame rate. But what I...
  2. Rubik

    ActionCam Camera Dolly

    Check this out: I used the car as the camera dolly. I stood up through the sunroof holding the ActionCam with CGO3+ gimbal/camera. My wife drove along a about 8 mph on a quiet road with beautiful fall leaves and filtered sunlight. This worked so well that I will use the technique again to...
  3. B

    CGO3+ Running Hot

    Hey, new to the forum. Hoping somebody here has had this issue before. We've had a Typhoon H here at the office almost a year. The CGO3+ camera is starting to run hot. The camera would operate fine for about 5 minutes and then power off. I had the cooling fan replaced and now it will run about...
  4. Rubik

    My Favorite Place to Fly

    This was shot late in the day with my Typhoon H and CGO3+ camera. Note the rush hour commute backup and Mt. Rainier on the left. The TH is 400' above ground. There is still a slight haze due to forest fires nearby. You can see how we are losing good valley bottom farmland to industrial...
  5. Wingshooter

    Q5004k -vs- Typhoon H and the Camera Differences

    Does anybody know or have experience enough to list the differences between the two camera's from the Q5004k and the Typhoon H? Specifically the settings that can be manipulated during flight like ISO etc...... Are the video's better? Also are the actual pictures / video that noticeably better...
  6. Dilly Joat

    SteadyGrip CGO3+ latency

    I recently obtained a second-hand SteadyGrip to use with my CGO3+ to get some ground based videos & photos in woodland where the H can't go. I have an older HTC One mini phone running the CGO app which connects OK to the camera (a few dropouts!) and when in camera mode, the latency is barely...
  7. DroneCalzone

    How can I change the password for CGO3+?

    The thread title is pretty self-explanatory - I would like to know how to change the camera password. It would also be nice to know how to change the password in CGO3. Thanks for your help!
  8. Rubik

    jpg vs dng

    This is a really hard subject to discuss on this forum. I can't show you my .dng files without converting them to .jpg. In fact, I've found that the viewing software has a significant impact on the quality of the picture that I see. For example, in Windows 10, I have "Windows Photo Viewer"...
  9. ojutter

    Camera Wiring Assistance

    Hello, Crashed my Typhoon H today and the camera working broke. Does anyone know if this can be repaired?
  10. C

    ST16 and Pano

    I have the latest updates installed. The problem is Pano only has Pano there is no option for 8 or 16 images. Any ideas. Thx in advance.
  11. J

    DNG photos, new H with CGO3+

    A couple of images captured with the photo mode on CGO3+. Selected DNG and RAW. Post processed in Mac Photo with minor tweaking.
  12. Murray Martz

    CGO3+ to ST16 micro sd card issues

    I have a Typhoon H that came with a micro sd ( 16gig ) card. When I am done recording, if I put the card in the ST16 to view the drone footage or edit it, the card reads as bad. If I put the card in the PC, I am able to view the files. Even after formatting the card with the ST16, once removed...
  13. Robert007

    CGO3+

    I went into secret menu, to calibrate my camera gimble,and now the camera is stuck revolving in circles, with a clicking sound. Need help or phone number to Yuneec typhoon Customer service number. Thanks Bob
  14. Robert007

    Secret menu

    I have tried to access into the secret menu , but when I tap numerous times on " about controller" nothing happened. What am I doing wrong, both s16 and Hexacopter are on and ready?
  15. jazzman81

    How can I capture stunning color using the CGO3+ ???

    The video I'm capturing with me CGO3+ seems dual and washed out. I was hoping the colors would be more vivid and distinct. I've tried various settings in various lighting conditions, and I can't seem to get the colors to pop on the footage I'm capturing. Is this a limitation of the camera? Is...
  16. skwty

    VIDEO - Great Lakes Surfing on Lake Michigan - Typhoon H

    So I messed around a little bit with the local surfers that took to the frigid Lake Michigan as the waves started to grow. I was not sure how the H was going to handle in the 20-24MPH winds, but I must admit that I was impressed. Even in the cold (whether that has anything to do with it or...
  17. jazzman81

    Yuneec Steady Cam CGO3+ Hack

    Here's a hack for the Yuneec SteadyCam that will work with the Yuneec CGO3+. I bought the Yuneec Typhoon H drone with the understanding that there would be a hand held platform available for the drone's camera. Yuneec sells the ActionCam, but its sold with the CGO3+ and I already own a CGO3+. I...
  18. S

    Fixed CGO3+ mount, attached... no pan or tilt!

    Hey gang, I was super excited to fly my drone in Compton today after receiving my replacement mount last night. But now that she's airborne, my pan & tilt abilities aren't working. However, once airborne, at least the fixed camera (VS slight pan to correct itself and look forward) ability is...
  19. B

    Cannot Initialize Camera

    I have a strange problem with my setup. Ever since I bought the rig, my ST 16 says "Failed to initialize camera" but connects to it fine. This is my standard routine: 1. Turn on ST16 and wait for it to fully initialize. 2. Turn on H. 3. ST 16 says RC connected connecting to camera 4. Camera...
  20. jazzman81

    Yuneec SteadyGrip Hack/Mod Help

    I'm looking to hack a Yuneec CGO SteadyGrip (8 AA) (YUNCGOST101) so that I can use the Yuneec Typhoon H CGO3+ on it. I'm looking for info that will describe the pinout of the plug on the underside of the SteadyCam so that I can connect it to the Yuneec Typhoon H gimbal connection board shown...