new replacement camera isn't connecting right

[raymond captuo]

Yuneec sent me a new replacement camera....I put it on no problem....went to bind it and i got the successful message....but the video is all pixelated....i try to update the firmware and a message pops up that says camera is not binded....i can't figure it out.....strange because yuneec also sent me a new track for the gimbal and some kind of connector....and a second lens...anyone encounter a problem with getting a new camera from yuneec??

 

[Steve Carr]

You may need to create a new model and start the binding process from scratch. Give it a try. Be sure to bind the ST16 first and then the camera.

 

[DroneClone]

Should not this all have been done buy Yuneec repairs before the sent it back to him? 27 point inspection they do, should have come to Ray bound and ready to fly! "Out of the Box" !

 

[raymond captuo]

You may need to create a new model and start the binding process from scratch. Give it a try. Be sure to bind the ST16 first and then the camera.

I tried that.....the camera binds but the H doesn't....

 

[raymond captuo]

so it turns out that yuneec sent me the wrong camera....more wasted time

 

[DroneClone]

What a bunch of incompetent goones! I'd demand overnite air!

 

[raymond captuo]

yuneec agreed to overnite air....so because its friday i would guess monday....better then waiting for over a week again

 

[Steve Carr]

so it turns out that yuneec sent me the wrong camera....more wasted time

Just curious what camera they could possibly send that would fit the H but not the right camera. I thought there was only one CGO3+.

 

[raymond captuo]

CGO3

 

[JCFlippen]

Yuneec do seem to bring a lot of hassle onto themselves - very lax. Whoever runs the show must spend most of their day playing Majong.

 

[PatR]

The camera for the Typhoon 4K and the H look pretty similar. If someone at Yuneec wasn't paying attention to the phone call or the service document....

 

[behrouz mazlom]

i bought the new typhoon h and i was trying to fly and take some shot but unfortunately crashed but it wasn't so bad just the camera ejected from typhoone and riped the wires so just i want to know how can i put it back or where the wires (black/red/blue/yellow/green/white)goes any help
thanks

 

[raymond captuo]

yuneec did the right thing and overnited me the right camera....expecting it this morning....

 

[John339]

behrouz mazlom did you get the wires back OK?

 

[Twowingers]

Well if was dji it be a lot worse lol


Sent from my iPhone using Tapatalk

 

[DroneClone]

yuneec did the right thing and overnited me the right camera....expecting it this morning....

Yuneec sent my repaired H back today, and the VP of Y-USA sent me a free Typhoon H Pro to boot with it, and another Wizard and two batteries! ****!, I must have struck a nerve! LOL
Just had to "RUB" it in one more time!
Hope you get it right this time Raymond!