RealSense mounting Screws

[DJ_HolliEw00D]

Hi all! I bought a RealSense module on EBay but was shipped the wrong screws for mounting the rear of the sensor. I’d send it back but I got a screaming deal on it, and it is recognized by the controller so it works. Is there a place to order screws or does anyone have any I could buy off them? I tried the local Fastenal and they can’t find any in that length, width and thread pattern, plus they’d make me buy a hundred...lol Thank you for your help in advance!

 

[PatR]

If you have the size and type, look at microfasteners.com in their metric selections.

 

[DCH]

If you have the size and type, look at microfasteners.com in their metric selections.

It uses two 2mm x 19mm, and two 2mm x 5mm Thread-forming screws for plastic -to be specific. Any other thread type might crack the hollow plastic posts.

However 19mm is unusually long for a 2mm, and experience has shown me they are way too long and very hard to fully seat enough to hold the RealSense securely. A 14mm or 15mm would work just fine.

 

[DJ_HolliEw00D]

It uses two 2mm x 19mm, and two 2mm x 5mm Thread-forming screws for plastic -to be specific. Any other thread type might crack the hollow plastic posts.

However 19mm is unusually long for a 2mm, and experience has shown me they are way too long and very hard to fully seat enough to hold the RealSense securely. A 14mm or 15mm would work just fine.

Thank you! It has proved difficult to find them, but I wasn’t sure on the actual sizes and I didn’t want to just try anything because I didn’t want to break the plastic well. I found a hex head 2mm x 14mm stainless with self tapping thread on Amazon so I’m going to buy a gross of them....so now I’ll have them for anyone who needs them...lol

 

[KEITH KUHN]

Hi all! I bought a RealSense module on EBay but was shipped the wrong screws for mounting the rear of the sensor. I’d send it back but I got a screaming deal on it, and it is recognized by the controller so it works. Is there a place to order screws or does anyone have any I could buy off them? I tried the local Fastenal and they can’t find any in that length, width and thread pattern, plus they’d make me buy a hundred...lol Thank you for your help in advance!

if you contact yuneec and are nice to them they might send you a couple.

 

[KEITH KUHN]

Have you tried Vertigo
Drones ?
Or terrestrial Imaging ?

 

[Chevyfreke]

Thank you! It has proved difficult to find them, but I wasn’t sure on the actual sizes and I didn’t want to just try anything because I didn’t want to break the plastic well. I found a hex head 2mm x 14mm stainless with self tapping thread on Amazon so I’m going to buy a gross of them....so now I’ll have them for anyone who needs them...lol

I just purchased one and it didn't come with any screws how much were they??

 

[MikeDV]

Thank you! It has proved difficult to find them, but I wasn’t sure on the actual sizes and I didn’t want to just try anything because I didn’t want to break the plastic well. I found a hex head 2mm x 14mm stainless with self tapping thread on Amazon so I’m going to buy a gross of them....so now I’ll have them for anyone who needs them...lol

If you still have some of those longer screws left, I sure could use a couple!

 

[Leepy]

Hi .do you have a link to the screw you bought to mount the realsence
Cheers lee

 

[KEITH KUHN]

Hi .do you have a link to the screw you bought to mount the realsence
Cheers lee

Did you try yuneec skins.
Or you can give them a call.
Keith Kuhn

 

[Mike Irish]

Try yuneec skins.​

 

[Yuneec Skins]

Realsense Mounting Screws:

https://yuneecskins.com/all-products/ols/products/realsense-mounting-screws-fits-all-yuneec-models