ST16 controller does not show wifi (greyed out) on the screen.

[Stephen1988]

I replaced the 2.4 GHz board. Was this the correct component to repalce or do i need to replace the 5 + ghz board?

In my experience the greyed out WiFi was due to a burnt out WiFi module on several occasions. U said u replaced the 2.4ghz board ? Is this correct, the WiFi board is the 5ghz board as pictured above . Even with the drone powered off the WiFi should toggle on in the android menu and show other WiFi connections like home WiFi.

 

[WTFDproject]

Yes, I double checked all the connections.
Still not getting any Wi-Fi connection. When the controller attempts to bind with the camera, the binding process last only 1 second then stops without recognising the camera. I have also reseated the camera in case of a loose connection.
On the android interface, in the system settings under Wi-Fi, the system does not detect any Wi-Fi networks either!
I replaced the 2.4 GHz board. Was this the correct component to repalce or do i need to replace the 5 + ghz board?

"I replaced the 2.4 GHz board. Was this the correct component to repalce or do i need to replace the 5 + ghz board?"
No. The camera and drone both bind using the 5Ghz WiFi board.