Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

firmware

  1. A

    Can I install only the gimbal firmware to Typhoon H480 ?

    I will find out that can I install only the gimbal firmware version to the Typhoon H480. For example downgrading the gimbal version from 1.25 to 1.22 and then installing the v1.25 back. There is N/A on Gimbal version section. And where I can download old Typhoon H's firmwares ?
  2. A

    How to downgrade Yuneec Typhoon H firmware ?

    Hello, anyone know how can I downgrade Yuneec Typhoon H firmware ? The problem is that the Typhoon H's GPS status does not show as OK when the Typhoon H starts. I have waited 15 minutes and still it informs me that GPS acquiring. It shows that 12-15 satellites have found, same on the controller...
  3. A

    How to change firmware from US to EU ?

    I am trying to change Typhoon H's firmware from US to EU, but I am not succeed. I have understood that only difference between US and EU version is the CGO3+ camera firmware, right ? So, st16 firmware and Typhoon H's firmware, Autopilot and Gimbal versions are the same in both US and EU...
  4. dronefisher

    What Happens If The SD Card Is Too Big?

    I recently bought a used Q500 -- my first Yuneec -- off Facebook marketplace. The guy said it was too complicated for him to calibrate and maintain, so it had been sitting for years in the box... Already love this beast. I have several questions that I appreciate any input on, given that this Q...
  5. DoomMeister

    Yuneec Downloads

    Due to the inconsistency of Yuneec maintaining their Downloads Section on their websites, this Dropbox repository was created and hosted by Yuneec Skins. The software and firmware can be found here: https://www.dropbox.com/sh/wgkmi499g3zky4t/AABukAnZOV7Xw_Bi3WEdl-j-a?dl=0
  6. 45B1F785-24C2-4FDC-9547-C62BE29EDE91.jpeg

    45B1F785-24C2-4FDC-9547-C62BE29EDE91.jpeg

    Firmware
  7. F814D683-A0B8-46DF-AFAB-06CCD78A4396.jpeg

    F814D683-A0B8-46DF-AFAB-06CCD78A4396.jpeg

    Firmware
  8. DoomMeister

    Breeze Compendium of How To’s

    To make more room on the lead page for recent posts and keep important topics readily available, this thread will list threads that were formerly “stickied”. https://yuneecpilots.com/threads/how-to-tell-if-my-phone-tablet-or-pad-is-compatible-with-the-breeze.12910/...
  9. DoomMeister

    Compendium for WiFi and Firmware Issues

    I am making this thread to reduce the number of sticky posts in the Breeze Discussion forum, but retain easy access to important threads related to firmware issues and WiFi troubles. The following list are threads that have proved very useful for a couple of years...
  10. U

    Using Mantis Q and QGROUNDCONTROL -update firmware

    I have a brand new Yuneec Mantis Q and I want to use QGC to plan and fly missions. I have updated all software on Manits through their app but when I tried to fly a mission in QGC I received a warning my Firmware is out of data and it will arm but will not execute mission. So I connected the...
  11. W

    [SOLVED] Breeze firmware : UPGRADE button won’t do anything

    Hi all, I have had my breeze for sometime now, and today I turned it on for a message to upgrade my firmware. No problem as I thought as I’ve done this several times now. So I followed the usual steps, connect to the internet, download the firmware, then reconnect to the breeze WiFi. Then I see...
  12. J

    Firmware Update - Now Can't Connect

    I had replaced my first Breeze because of the wifi issue. Then I finally took it out for a flight, worked great, then when I got I started to transfer the videos. It was taking a while so I decided to wait and update the firmware. That was a mistake. Now I'm having the same issue as the first...
  13. WaltzingPablo

    Should I buy a Breeze?

    Hi everyone. A few years back, I would have given my left arm to buy the Typhoon H. Things are slightly different now, and so is my budget. I really like the look of the Breeze. I mean - I REALLY like it. However....... Keep reading what look like horror stories to do with wifi connectivity...
  14. M

    No Fly Zone Update Problem

    Hey, all! I searched, but couldn't find an answer, so here's my situation for you gurus to ponder... As a Part 107 pilot, I needed to disable the NFZ restriction in my Typhoon H, so I downloaded the NFZ files and GUI to use on Windows 10. The GUI successfully connects and displays all the...
  15. M

    Version N/A

    My Typhoon is descending so slowly and landing weird i decided to upgrade firmware. (yes, i re calibrated) I updated typhoon h firmware via WiFi and locally from sd card and it still is showing N/A for version. See pic. I couldn't find any suggestions googling so thanks in advance for any help.
  16. gwhuntoon

    Where's the new Typhoon H firmware?

    Just thought I'd ask in the hopes that someone would know something about this. If I recall from the last CES, there were great things coming in the next firmware for the Typhoon H, especially the ST16. So far though, nothing since March.
  17. iracer99

    New H, never used, sat for a year

    Hello, I have a new Typhoon H that I bought in November of 2016 that has never been out of it's original backpack case. (Life happens) I'm wanting to bring this thing out and start enjoying it, but I'm concerned about possible problems with the LiPo batteries, and firmware. My questions...
  18. M

    no FCV

    Heloo My breeze don't show FC version and ESC version It's don't flight . Camera work but don't move I upload newest FW 0.1.47 correctly but nothing change for better I think something i broken but What I can to do? Please help
  19. J

    Significant video quality loss after latest firmware upgrade

    Hi, we upgraded our breeze in the beginning of the summer with the latest firmware, 0.1.47F. We happily shot videos during summer, with recurring disappointing video quality. After trying various settings changes, we tested switching back to an older firmware (not sure which package version...
  20. P

    FIRMWARE

    Good morning I have a problem with the firmware update of the drone breeze. The process freezes during the second phase. I tried disabling the APP and reinstalling it, downloading another copy of the update file. But I can not do the same. Someone can help me?