Breeze Compendium of How To’s

[DoomMeister]

To make more room on the lead page for recent posts and keep important topics readily available, this thread will list threads that were formerly “stickied”.

How To: Tell if my phone, tablet, or pad is compatible with the Breeze?

As a general rule your device must support 802.11ac WiFi to work with the Breeze. Some devices will work that only support 802.11a, but if your device only supports 802.11b/g/n it will not work with the Breeze directly. The best place I have found to check the specifications of your device is...

yuneecpilots.com

How To: Breeze Compass Calibration

The compass (or magnetic) calibration is one of the most important things to accomplish on your Breeze to help prevent flyaways. This is best accomplished in an open field away from any electrical power lines (above or below ground), reinforced concrete slabs or buildings, metal objects like...

yuneecpilots.com

How To: Save Breeze Telemetry (FlightLog files)

Extracting the Breeze Flightlogs (telemetry and Breeze Cam settings) for iOS 1. Attach iPhone/iPad to the computer with Lightning USB cable. 2. Open iTunes and click on the Phone icon at the top left. 3. On the left under Settings click on File Sharing. 4. In the Apps list select Breeze...

yuneecpilots.com

How To: Setup the Comfast CF-WR370AC or CF-WR371AC for Use With the Breeze

The only difference in these two models is that the WR371AC has external antennas and WR370AC does not. 1) Set the band switch to 5.8 G on the Comfast. 2) Place the Comfast into the power brick and hold the reset button for about 10 seconds (when you release it you will get an orange indicator...

yuneecpilots.com

How To: Setup the ZyXEL WRE-6606 for use with Breeze

This guide is from recent memory and may not be exactly right, but will be good enough to get you there. Edit (02/26/2019): You will need to place the mode switch to the ‘R’ position which puts the 6606 in the repeater mode of operation before starting the first step below. Setting up the...

yuneecpilots.com

DIY- use connector from OEM Breeze charger to make adapter cable for third party charger.

This project is a way to repurpose a defective OEM Breeze charger. Mine was not defective so I was more cautious separating the upper and lower halves of the charger as they are sonically welded together. I used a small cutoff wheel for a Dremel rotary tool to cut along the weld line. This...

yuneecpilots.com

How To: Breeze WiFi and Firmware Issues

Many have had troubles connecting to the Breeze via WiFi. There are several reasons this can happen. the first and foremost is that the device being used is not compatible with the 5.8 GHz WiFi the Breeze requires. To check your device's WiFi capabilities see this thread Is my phone, tablet, or...

yuneecpilots.com