firmware

I just received a new Typhoon H Pro and made my first successful flight. In the process of doing research on how to use it, I came across a download page with firmware updates for the H. It lists version numbers but not issues dates. Also, I do not know where to find the firmware versions...

I want to see the impact of different versions of the breezeCamApp in different versions of firmware in my breeze. Setting is a sony XperiaZ C6603 with android Lollipop 5.1.1. Firmware in the breeze is FCV 1.1.3 ESC 1.0.3 and CAM 1.0.0. Flight is controlled with the original gamesir controller...

Some background: So, my experience of Yuneec's Breeze drone has been mixed, to say the least. The first one I purchased developed an issue with the camera's servo motors. Loud scraping noise, then it froze completely. Drone was replaced under warranty - great stuff. This replacement drone then...

I finally upgraded the Breeze from an old firmware (1.0.x). (Im using a Sony Z5 and the Gamesir controller.) This instantly got better: The controller stays connected, no problems whatsoever anymore! The Wifi shows up and connects faster than before. This instantly got worse: Wifi signal is...

Hi, FYI.... I'm writing this to help others who may be in a similar situation as me. After my Breeze crashed a couple times due to faulty app and firmware updates I tried to contact Yuneec for help. I spent a long time on hold, and a long time with '0 minutes remaining' before I got hung up...

Hi, I cannot update firmware on Yuneec Breeze, just purchased today. Error message when checking for the new firmware: Check firmware version failed. Please check network connection. The drone is connected to iPhone with 4G Internet connection, which is working at the time of Wi-Fi drone...

Hi there, I bought a brand new Breeze. For about 2 hours, i tried to bind it to it’s own wifi, faced a lot of problems. Sometimes, the wifi was not even found. (I tried with an IPhone 7, ios version 10.2.1) Anyway, at a time , I succeeded to bind to wifi , made the config and tested indoor at...

I read the forums today and saw that the cross hair was removed with an update. I bought mine Dec 31 2016. Did the update 5 days ago. Went on first flight today ( not the first flight of the drone, but the first flight since the update ). Realized it was gone. So after reading the thread about...

Ran my first and only firmware update on my new typhoon h this week to take advantage of the new features. Read this forum to see if there were issues, didn't find anything alarming. Applied the update per instructions. Did it twice in fact to ensure I had not missed a step. Waited 2 days to...

Greetings, Just did new firmware update, downloaded from Yuneec St16 & H firmware, the H firmware is a zip file. Follow Yuneec video to do update, my Pro is just few months old so had current updates. Well finished update, but appears some thing didn't go right. Now have v03.01.b30 on St16...

I filled out the form and sent along Proof of Purchase as well. Has anyone here actually had Yuneec send them UnLocked Firmware that removes the NFZ restrictions?

So, I downloaded it. Rebooted everything and checked for updates again. It said "No firmware on sd card" again. It apparently doesn't recognize that it downloaded and installed firmware already. IS there supposed to be firmware on the SD card? Which one? Controller or aircraft or both...

Hey all I've haven't been flying since September. Obviously I'm trying to update now to the November update but I can't get my ST16 to unpack the files. I've tried 3 memory cards. All formatted to MS-DOS(FAT) on a mac for FAT32. One is the original card it came with the other 2 are 32gb cards I...

So, I tried to do a firmware update following the standard procedure. Now, when I power on the H I don't get the normal series of beeps and the LEDs don't come on. The camera light is green and connects to the ST-16. The H power light is on. Gimbal Version: V.125 Autopilot Version: N/A...

Back in September of this year I posted a "How To" video on updating the Firmware in the Typhoon H. When Yuneec added the Over The Air (OTA) feature to the Typhoon H firmware update, they changed how the update was done. You now update the ST16 first in order to load the instructions for OTA...

Latest firmware is V3.01 and V3.01.b27

Hello everybody. I've created a firmware archive with (almost?) all available firmware's for the H and the ST16: Typhoon H firmware archive Latest Firmware Typhoon H V3.04 | Latest Firmware ST16 V03.01.b30 | Last updated on March 19, 2017 Maybe it's useful for somebody :)

In doing some research for my own CGO3-related issues, I've seen some references to what people are calling the "White Light of Death". What is this, and have people found any solutions in terms of fixing it? I'm asking because my own CGO3 has the solid white light on the front diode of the...

I thought I read that the log files were suppose to be deleted b4 doing the newest update. I tried doing a search for this and could not find that post. Don't know if I'm doing to many drugs or if this is what should be done. I did go to Yuneec's site and I didn't see any reference to this...

Hi all! Just out of curiosity. Assuming one were to factory reset the entire ST10+ and reload the firmware and apps onto it; where would you get the ST file? The latest update only seems to include a TX file.