You need to bind the new camera to the ST16. The password is 1234567890.what should be done to the camera began to work
Does the camera level itself when it's turned on?When turned on, the LEDs on the camera do not glow
Is it listed in the bind menu? Tip the H forward 2 times until the status light flashes orange. Then check the bind menu on the ST16. Press refresh to see if the camera is listed.whether the camera should operate immediately when combined with H
Is the new camera ready for initialization? the impression that the camera is not supplied power, I know that the energy is !!! I tried everything.Is it listed in the bind menu? Tip the H forward 2 times until the status light flashes orange. Then check the bind menu on the ST16. Press refresh to see if the camera is listed.
Yes.Yes, it should power on when the H is turned on. When you look at the top of the gimbal mount are there 6 electrical contacts?
My H won't go into bind mode.???Is it listed in the bind menu? Tip the H forward 2 times until the status light flashes orange. Then check the bind menu on the ST16. Press refresh to see if the camera is listed.