...and now my H is a brick...
The first dumbass thing I did, was trying to update the firmware, without making sure the wi-fi was enabled on the aircraft...since I couldn't connect to the a/c with the ST-16, I decided to d/l the update for both from Yuneec's website, and d/l'd it onto a thumb drive, which I plugged into a dongle (one end for standard USB, one end mini USB). I then plugged the mini USB end of the dongle into the female mini USB port on bottom of the main body of the H (right next to the RealSense module/pod).
About this time the phone rang, interrupting my train of thought...(this is why my best friend, an Audi/VW mech, refuses to answer his phone while he's working; he says it cuts his error rate to nearly zero)
After hanging up the phone, I discovered my error with the wi-fi...and...(second dumbass thing) forgot to disconnect the dongle...and hit the button to update the firmware on the aircraft...now...
The aircraft will not respond in any way when the battery is inserted, except that the power button illuminates. Holding down the power button does not shut off the illumination, or cause the a/c to beep, light up, or any other response...I feel sick.
I did successfully update the ST-16...and the ST-16 WILL connect to the camera...but I cannot control the camera---at all. The gimbal works, as it attempts to maintain its attitude when the a/c is picked up and moved in yaw and pitch axes.
Ideas to recover from this huge pile of dookey I jumped into w/both feet??
The first dumbass thing I did, was trying to update the firmware, without making sure the wi-fi was enabled on the aircraft...since I couldn't connect to the a/c with the ST-16, I decided to d/l the update for both from Yuneec's website, and d/l'd it onto a thumb drive, which I plugged into a dongle (one end for standard USB, one end mini USB). I then plugged the mini USB end of the dongle into the female mini USB port on bottom of the main body of the H (right next to the RealSense module/pod).
About this time the phone rang, interrupting my train of thought...(this is why my best friend, an Audi/VW mech, refuses to answer his phone while he's working; he says it cuts his error rate to nearly zero)
After hanging up the phone, I discovered my error with the wi-fi...and...(second dumbass thing) forgot to disconnect the dongle...and hit the button to update the firmware on the aircraft...now...
The aircraft will not respond in any way when the battery is inserted, except that the power button illuminates. Holding down the power button does not shut off the illumination, or cause the a/c to beep, light up, or any other response...I feel sick.
I did successfully update the ST-16...and the ST-16 WILL connect to the camera...but I cannot control the camera---at all. The gimbal works, as it attempts to maintain its attitude when the a/c is picked up and moved in yaw and pitch axes.
Ideas to recover from this huge pile of dookey I jumped into w/both feet??