Need a diagnose, what cause this on videos?

[MaddionMax]

It looks like the camera is bound to the controller but not the aircraft.
Turn off the ST16.
Put the gimbal lock on the camera. Turn on the H Plus.
After it boots up, turn the aircraft up side down and see if the motor lights all flash light green.
Turn on the ST16. When it finishes booting up, go to the bind menu and bind the aircraft.
You may have to press the refresh arrows several times before the aircraft is listed.

Checked, it was binded, but reconnected again.

 

[Steve Carr]

So the telemetry continues to read zero?

 

[MaddionMax]

Yes

 

[Steve Carr]

If it were my H Plus I would do a factory reset of the controller. I may be a glitch in the Flight Mode app. As part of the reset, the Flight Mode app must be reinstalled.
Or you could try to re-install the app without doing the reset.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[MaddionMax]

Thanks Carr, honestly today a good guy bought my H Plus package. I hope next mintha, I can buy a brand new package of H3.

Finally I think I was unlucky with the H Plus.