Adding a second camera to the Typhoon H

[Richk]

So I looked at the Inspire 2 and one feature I like is to have a second camera for 2 person operation . So I got to thinking and I was wondering is I could add something like the Boscam 5.8 or would that cause problems with the Typhoon radio?

 

[Snagglesworth]

I've been thinking if doing something similar for a while. With 2.4 and 5.8 both being used with the Typhoon I was thinking of trying a 3.3 vtx setup. Hopefully should work without causing interference on either 2.4 or 5.8

 

[Richk]

I wonder how DJI does it on the Inspire 2

 

[PatR]

5.8 should work by selecting a frequency different from what is used by Yuneec. A frequency scanner would establish what the is set to. Another option might be 900mHz but the antennas are a bit large. Might be a good idea to use a small separate battery for an added pilot cam to avoid other system interference.


Sent from my iPhone using Tapatalk

 

[Richk]

I was thinking of adding a separate battery and Foxtech seels a boscam with a 200mhz transmitter built in and it Runs on 5.8

 

[WesBur13]

I wonder how DJI does it on the Inspire 2

I've seen multiple Lightbridges going at one, so I assume just two signals on varying bands

 

[Dragonflyerthom]

It will not be that difficult to put on a second camera but you will have to also include a separate battery unless you want to try and Tyin to your TH.

 

[Tom C]

Being that the last post on this thread was 11 months ago. IAM curious to know if anyone has tried any configuration to do this to the H & it be successful?

 

[Snagglesworth]

Yes. I've modified a cgo3+ so it also has a fpv cam and vtx onboard. It can be swapped out between craft so I can fly with or without it. On the st16 I have a second screen mounted so I can see the video from the camera.

Facebook

 

[ukaleq]

Yes. I've modified a cgo3+ so it also has a fpv cam and vtx onboard. It can be swapped out between craft so I can fly with or without it. On the st16 I have a second screen mounted so I can see the video from the camera.

Facebook

This is cool, what is your setup for the FPV + receiver?

 

[Snagglesworth]

I use a Eachine diversity monitor mounted above the st16, that way I have both the fpv feed and the cgo3 feed visible while flying.

 

[Dr Delta]

Is that extra cam for photo only?
Any nice results that would not be possible with only OEM cam?

 

[Photo]

I use a Eachine diversity monitor mounted above the st16, that way I have both the fpv feed and the cgo3 feed visible while flying.

View attachment 8703

Hi, I use Aerial photography with Robinson R44 based at Bromma Airport Stockholm as my clients want to see the video while filming. I have connected the Feelworld to the ST16 with a 5 meter HDMI cable so the client don't have to climb on my shoulders while I operate the H/ST16 and cam. Works great! Then you can also watch the ST16 replay on the bigger Feelworld 10.1" screen.

 

[Snagglesworth]

Hi, I use Aerial photography with Robinson R44 based at Bromma Airport Stockholm as my clients want to see the video while filming. I have connected the Feelworld to the ST16 with a 5 meter HDMI cable so the client don't have to climb on my shoulders while I operate the H/ST16 and cam. Works great! Then you can also watch the ST16 replay on the bigger Feelworld 10.1" screen.

To allow my clients to see the feed from the st16 I use a Samsung view tablet. 19" screen and totally wireless.

 

[Snagglesworth]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies