Q500 motor and esc question NEED HELP

[Che']

Hi Everyone

So i crashed my q500 bought a replacement chassis did the swap it was all good
until i realized that the esc and the led's are specif it to each motor ..

so if you haven't guessed already i have mismatched the motors and esc's

i have everything soldered back up.. and tested ...instah Flip...sooo now to my questions

1 is there a way to tell which one goes where

2 if not ... can they be reprogrammed VIA software....
2.1 GUI???? what is that

3 is there a repair schematic ?

 

[wedbster]

Mac: http://download.yuneec.com/Typhoon_Q500/GUI/mac/Q500_GUI_MAC_V1.01.pkg
PC: http://download.yuneec.com/Typhoon_Q500/GUI/windows/Q500_GUI_WIN_V1.01.exe

download and install.

All you have to know you find when you start the software.

Look for Sensor Information
There you can find the point to ESC ID Assingment and again HELP

 

[Che']

Mac: http://download.yuneec.com/Typhoon_Q500/GUI/mac/Q500_GUI_MAC_V1.01.pkg
PC: http://download.yuneec.com/Typhoon_Q500/GUI/windows/Q500_GUI_WIN_V1.01.exe

download and install.

All you have to know you find when you start the software.

Look for Sensor Information
There you can find the point to ESC ID Assingment and again HELP

AWESOME THANKS ... and wow quick response ..