Hello Fellow Yuneec Pilot!
Join our free Yuneec community and remove this annoying banner!
Sign up

CGO3+ shows rotorarms when making a panorama

Joined
Dec 20, 2021
Messages
17
Reaction score
1
Age
46
Since i while the CGO3+ shows the rotorarms in the upper part of the image when making a panorama.
I don't know if it has to do with it that the unit once crashed, because everything seems to work good
and even the gimbal doesn't show any anomalities.
The camera gives a strait horizon when placed on a flat surface.

Any idea on how to fix this?
 
It sounds like the top "travel stop" is broken off the front shell. If you look closely with a good light into the gap between the left hub cover and the camera shell, you should be able to see two little plastic travel stops. If there is only one (or none), you will need to replace the front shell.
 
What is the position of the tilt switch?
The most left upper one.
 
It sounds like the top "travel stop" is broken off the front shell. If you look closely with a good light into the gap between the left hub cover and the camera shell, you should be able to see two little plastic travel stops. If there is only one (or none), you will need to replace the front shell.
You mean the shell of the CGO3+ ?
 
Didn't understand the question.

Prepare a stopper from a small bolt instead of the original plastic one.
 

New Posts

Members online

Forum statistics

Threads
20,955
Messages
241,587
Members
27,284
Latest member
csandoval