St10+ Controller Is Dead

[Torcida1950usa]

Hello everyone.
I think my ST10+ is dead as I killed it.
Is there any way to bring it back to life?
When plugged to USB on laptop and I push button inside headphones jack there's no connection between laptop and st10+.
Now when I turn st10+ on, there's red light on showing that remote is on but there's nothing on the screen, just black screen.

 

[WTFDproject]

You can try unplugging the battery for a few minutes and plugging it back in.

If that does not work, be prepared for a long, complicated task, and go through the process listed in:
ST10+/ST10 Un-Brick Guide | Yuneec Drone Forum (yuneecpilots.com)

 

[Torcida1950usa]

You can try unplugging the battery for a few minutes and plugging it back in.

If that does not work, be prepared for a long, complicated task, and go through the process listed in:
ST10+/ST10 Un-Brick Guide | Yuneec Drone Forum (yuneecpilots.com)

Thank you.
I believe that ST10 is dead for good as I did try link for ST10+/ST10 Un-Brick Guide.
I did order new one.
Just wanted to use this controller to see if I can put right firmware on.

 

[WTFDproject]

Do you know who turned it into a smartphone?

 

[Torcida1950usa]

Do you know who turned it into a smartphone?

I did ?

 

[WTFDproject]

Did it work?

 

[Torcida1950usa]

Did it work?

It didn't work to control drone and wifi didn't work.

 

[Torcida1950usa]

Did it work?

Hi WTFDproject.
Do you know, is it possible to have different firmware and be able to fly the drone?
Thank you

 

[WTFDproject]

The only firmware I know of that works is the original ST10+ firmware. I don't even know how you turned it into a Smartphone. If the "Unbrick" post does not work, it will require someone more familiar with android than I am to reinstall the original operating system and the original firmware.

 

[Torcida1950usa]

The only firmware I know of that works is the original ST10+ firmware. I don't even know how you turned it into a Smartphone. If the "Unbrick" post does not work, it will require someone more familiar with android than I am to reinstall the original operating system and the original firmware.

I used coolpad 8076d firmware with ICS 4.0.3 that i found online, by installing app to find hardware info.
I don't know nothing about developing but I learn by doing mistakes lol.

 

[Sodade]

Bonjour à tous.
Je pense que mon ST10 + est mort car je l'ai tué.
Y a-t-il un moyen de lui redonner vie ?
Lorsqu'il est branché sur USB sur un ordinateur portable et que j'appuie sur le bouton à l'intérieur de la prise casque, il n'y a pas de connexion entre l'ordinateur portable et le st10+.
Maintenant, lorsque j'allume st10 +, un voyant rouge indique que la télécommande est allumée, mais il n'y a rien à l'écran, juste un

 

[Sodade]

Bonjour j'ai le même problème suite à une mise à jour en Juillet 2023. Yuneek n'assure plus de service après vente sur le Q500. En Europe il faut utiliser la société Minitec BTD Service GmbH – Sie können sich auf uns verlassen – Wir sind Ihr kompetenter Partner! qui ne répond pas au mails pour l'instant.