- Joined
- May 30, 2016
- Messages
- 198
- Reaction score
- 124
Typhoon H - Battery connector
go to the shop: www.quadcam.ch
So here is my first prototype of a charging plug for charging the battery with a regular LiPo charger. The plug holder is 3D printed in PLA.
I charged now three batteries with 6A without any troubles and it is much quicker then with the delivered charger.
The 3 pins are spring loaded however those pins are quite expensive hope I will find some cheaper ones.
Andy
go to the shop: www.quadcam.ch
So here is my first prototype of a charging plug for charging the battery with a regular LiPo charger. The plug holder is 3D printed in PLA.
I charged now three batteries with 6A without any troubles and it is much quicker then with the delivered charger.
The 3 pins are spring loaded however those pins are quite expensive hope I will find some cheaper ones.
Andy
Last edited: