Looking in my ST16 internal file manager, under Modelslcon there are 6 .jpg files. Where do I find the model profiles?Use the 920 model with the 480 profile.
And yes I fly with that configuration regularly
Looking in my ST16 internal file manager, under Modelslcon there are 6 .jpg files. Where do I find the model profiles?Use the 920 model with the 480 profile.
And yes I fly with that configuration regularly
I see the post by Gurusonwheels re theJust read the instructions from the start of page 3
I see the file.....Just read the instructions from the start of page 3
Here's the thing I have flown the h in both methods without issue. However, if you bind it to the 920 model (not the file mode method) it will feel looser not as locked in.
I know it's been stated because the pids are different but unless the st16 uploads the pids when it's bound. Which I doubt . The pids are stored in the flight controller in the H. Now the rate curve and expos in the st16 are most likely different in turn causing the looseness.
Please re read my statement.thats because your using the 920 profile . you should not use that .
you should use the 480 profile as all the flight parameters are stored in the profile .
i have posted a 480 profile with the waypoints enabled .
its simple . simply unzip the profile to SD card . insert sd card into st16 and import the profile .
It says "No Model Found".thats because your using the 920 profile . you should not use that .
you should use the 480 profile as all the flight parameters are stored in the profile .
i have posted a 480 profile with the waypoints enabled .
its simple . simply unzip the profile to SD card . insert sd card into st16 and import the profile .
OK, Gurusonwheels I am going to use your method. When people ask for a step by step process most are expecting something like this.....
1) From your PC, unzip the FPV-Typhoon H-2017-03-16 19.49.43.zip file to a micro SD card - use the 16gb one currently in the ST16 (my ST16 would not recognize a 32gb card)
2) insert the micro SD card into ST16
3) turn on ST16, touch pad, OK, touch file icon, touch file manager, touch SD card symbol upper left, touch function arrow to right of FPV -Typhoon.... folder, touch copy, touch SD card symbol upper left again – (puts you back in root directory)
4) now in root directory, touch paste to copy folder to root directory
5) exit, exit to go to flight screen
6) touch model select, touch new model, touch import model
5) “No model Found”…..
Dan, have you flown with the new profile yet? I'm noticing some of the same traits as just using the 920 profile in regards toMine is working now with the uploaded profile, thanks guys.
We use essential cookies to make this site work, and optional cookies to enhance your experience.