1. At the same time that I changed out the GPD module I also switched to a refurbished ST16 with the three antennas. I was thinking of doing the third antenna upgrade myself and then I found this refurbished one for a good price. What all do I have to do if I swap out ST16 controllers? I do know that this wasn't just an open box because there are some photos, and flight data on it form I'm guessing the previous owner. The data is from 1,200 miles away if that matters. If I go back and use my original ST16 is there a step by step procedure for this? I would just go thru the binding procedure.Couple more things that might provide a clue:
1.) Did anything change between the last time the GPS acquired quickly, and the first time you had to wait.
2.) Have you tried, (or can you try) a different controller?
3.) Can you upload the flightlogs from the ST16 for review?
4.) Can you upload a screenshot of the ST16 after it has been "acquiring" for a few minutes?
2. Yes, as noted above I've tried another controller, but only the one other controller.
3. I will try and upload the flightlogs. I will do it and you let me know if its the right ones or done the correct way please.
4. I will take a screen shot of the controller while acquiring.
I am working so I will get you the information as soon as I can. If the weather is good I will try and fly after work and upload your requested information at the latest. Thanks all for the help.