- Joined
- Jul 4, 2017
- Messages
- 4,258
- Reaction score
- 2,025
First Test Flight
- Thread starter Victory Pete
- Start date
It should not shut down on its own, at least mine does not. Are you sure its shutting down or is it just going back to ready. Regardless, after calibrations it has been said to restart both the H and the 16.
Is it the most recent version? What happens after you do the calibration? Does it restart or shut down?
Yes, no lights or sounds. It did this twice so far after I redid the procedure. The first time it failed and I got the white light, not too surprised as I was pretty clumsy doing the spinning.
Okay, tried it with the controller still in my house, H out on front lawn, it restarted. Just goes to show how the manual needs to be specific and accurate. It should state that the controller along with cell phones and other electronic device should be 11 feet away, I would have followed methodically like a donkey after a carrot on a stick
PatR
Premium Pilot
We have provided many of them but you have insisted on debating all of them while blaming the manual for being incomplete. We already know that and why we wrote a better one. A very well documented manual, developed by users having considerable experience, is found in the Stickies at the start of the Typhoon H forum. I strongly suggest you read it and follow the directions it contains. There’s no reason for everyone to post the same info over and over for every new user that refuses to read things they’ve been directed to read. We’ve led the horse to the water but waiting to see if it drinks. Do have a safe and Merry Christmas.
Last edited:
I did follow directions, I read the manuals and watched videos. Nowhere does it say you have to calibrate before first flight and also no specifics about the controller being 11 feet away. Please do not pull this "Forum Nazi" tactic with me, I am on many, many forums and there is always someone who acts like this. It does no good for the benefit of all the Forum members.
- Joined
- Jan 1, 2017
- Messages
- 78
- Reaction score
- 32
- Age
- 79
Can't believe no one caught this. "It is a bit clumsy spinning this thing with the controller hanging from my neck, but went through all axis and again it shut down" Your controller should be 30 feet away from the H when doing the calibration, not hanging around your neck. Watch the videos and use the search engine at the top or page.
We are all trying to help you avoid the problems we have all had to deal with.
Tom
We are all trying to help you avoid the problems we have all had to deal with.
Tom
Right I now know this, I found it in one of the many YouTube videos. It should be in the manual and in Yuneecs videos.
So I had my first controlled flight. I am in turtle mode and when I go left or right there is a jerky movement. I don't see this with forward or back. I put it in between turtle and rabbit and it seemed to go away. Overall it feels very good. A bit more solid then the Blade 350 QX3 I sold 3 years ago.
I have been flying RC for many years, I understand stick movements. This seems to be something different. If I move the stick to the left or right, even gently, the H starts to move and then abruptly stops even though my stick is still in the same position.
